Starting; Choosing Functions; Speed; Main Menu Functions - Malaguti CNK 50 DRAKON Workshop Manual

DRAKON 50 NKD

STARTING

Put the key into the ignition switch and turn it to
after which the last function used before turning off the vehicle will appear.
The check is automatically performed every time the key is turned to. If the check is not displayed,
contact an authorised MALAGUTI Service Centre.

CHOOSING FUNCTIONS

Functions are divided into menus and sub-menus (bar
graph), which make the display easier to understand.
To select a function, press the MODE button, as shown in
the diagram.
The diagram shows you for how long the MODE button
should be held down (near the arrows).
To help you identify the functions and acquire information
about their characteristics, a description is provided here
below, indicating the functions in the order in which they
appear on the display
Menu functions can be seen from every sub-
menu.

SPEED

This numeric value is displayed in km/h. This is the only
function that is shown on the display at all times.

MAIN MENU FUNCTIONS

A
TOD (total)
Selection Mp/h
Km/h
H
TD (partial)
Reset
05189010
FRAME AND RUNNING GEAR
. A check for all operations will automatically appear for 3 seconds,
B C
(rev counter) STAND-BY
Submenu selection
(Bar graph)
G
AVE (average)
Reset
A) TOD FUNCTION
This indicates the total distance travelled; this value is never reset and remains even
after the vehicle is turned off (the total distance travelled will be stored for 10 years
running from the last time the vehicle was used).
17
INSTRUMENT
AND CONTROL FUNCTION
05189008
D
Acceleration
Stop Reset/Start
03/06
4
Sub-menu functions
(Bar graph)
Speed
Main menu func-
tions
E
TIME (time)
Time adjustment
F
LAP (chronometer)
05189009
A