How To Use Program Groups; How To Turn The Display Light On And Off; How To Label Auxiliary Buttons; How To Operate The Aquarite Chlorine Generator Menu - Jandy AquaLink RS Owner's Manual

Program groups are useful for setting specific programs for summer
and winter use, or for vacation and at-home. The AquaLink RS will
store separate programs for each group.
Use the PROGRAM GROUP Menu to switch between PROGRAM
GROUP A and PROGRAM GROUP B. All programming done while
in PROGRAM GROUP A is exclusive to Group A, and all
programming done while in Group B is exclusive to Group B. This
means that when switching between Groups A and B, you change
which set of programs is operating.
Confirm you are in the right Program Group before programming
equipment. To check programs for a Program Group, switch to that
Group and review programming by using the Review Menu
(described on page 16).
The DISPLAY LIGHT Menu lets you turn the back light on and off
on the AquaLink RS Controller Display.
The LABEL AUX Menu allows you to customize the descriptions
of each piece of equipment that the AquaLink RS controls. For
example, you can set the display to read YARD LIGHT ON
instead of AUX 4 ON.
NOTE: Some labels add special features (i.e., 30 minute timed
off times) to the Auxiliary. See page 15 for more details.
Support for AquaRite Chlorine Generator to communicate with the
AquaLink RS Control Panel. The AquaLink RS Indoor Control
Panel will display % of chlorine and the amount of time the Super
Chlorinate will run.
1. Press the MENU button. Use the FORWARD and BACK buttons to
move to the PGM GROUP Menu and press ENTER. The AquaLink
RS display will read PROGRAM GROUP A IS ACTIVE or
PROGRAM GROUP B IS ACTIVE.
2. The AquaLink RS display will read GROUP A <—>* or GROUP B
<—>*. Use the FORWARD and BACK arrow buttons to toggle
between GROUP A and GROUP B. Press ENTER when the group
you want is displayed.
1. Press the MENU button. Use the FORWARD and BACK buttons to
move to the DISPLAY LIGHT Menu and press ENTER. The
AquaLink RS display will read LIGHT ON/OFF <—>*.
2. Use the FORWARD and BACK arrow buttons to toggle between on
and off. When the option you want is displayed, press ENTER.
1. Press the MENU button, then press the FORWARD button and
scroll through until you reach SYSTEM SETUP. Hit ENTER and
LABEL AUX will be displayed. Press ENTER again and the display
will read SELECT AUX TO LABEL or PRESS ENTER TO END.
2. Press the button of the auxiliary equipment that you wish to label,
for example, AUX 1. The AquaLink RS display will read AUX 1
<—>*.
3. Use the FORWARD and BACK arrow buttons to move through the
list of labels. When you get to the desired label, press ENTER.
Note on labeling lights: Since many different types of lights can
be controlled by the AquaLink RS, there is a special submenu for
lights. To access it, follow the steps above, and move through the
list of labels until you come to the label LIGHTS <—>*. Press
ENTER. You are now in the lights submenu. Use the FORWARD
and BACK arrow buttons to move through this submenu, and press
ENTER when the light label that you want is displayed.
There is also a waterfall submenu that functions in the same way.
To set the percentage of chlorine, press the Menu button, use the
back or forward arrow button to display SET AQUARITE, press enter.
Use the back or forward arrow button to change the percentage of
chlorine the Aqua Rite will dispense.
To set SUPERCHLORINATE, press the Menu button, use the back or
forward arrow button to display SUPERCHLORINATE press enter. To
set the amount of hours Super Chlorinate will run, go to SYSTEM
SETUP press enter, use the forward or back arrow to move to
AQUARITE HRS, press enter. Use the forward or back arrow button
to set the number of hours. Press ENTER to return to the information
screen.
*Rev. "I" PPD only