The Cancel Button; How To Cancel A Program; How To Cancel An Auxiliary Label - Jandy AquaLink RS Owner's Manual

The CANCEL button lets you cancel specific programs and settings for the AquaLink RS. When using the Menu button, the CANCEL button
also allows you to cancel steps in the Menu. Below is a brief list of things that you can do with the CANCEL button:
l Cancel all equipment programs for a piece of equipment (cancel all).
l Cancel individual program for equipment (cancel some).
l Cancel Freeze Protection from all devices except for filter pump.
l Cancel specific auxiliary equipment labels.
l Cancel light dimming control on an Auxiliary.
1. Press the CANCEL button. Use the FORWARD and BACK buttons to advance to PROGRAMS <—>* and press ENTER. The AquaLink
RS display will read SELECT DEVICE TO BE CANCELED.
2. Press the equipment button for which you want a program to be canceled, and press ENTER.
3. If there is only one program , press ENTER. The program will be canceled.
4. If there are more than one programs, the AquaLink RS display will tell you how many programs there are (for example, if there are three
programs, the AquaLink RS display will read 3 PROGRAMS EXIST).
5. The AquaLink RS display will read CANCEL ALL <—>* . Use the FORWARD and BACK arrow buttons to toggle between CANCEL ALL,
and CANCEL SOME. Press ENTER when the selection you want is displayed.
6. If you CANCEL ALL, all programming for that piece of equipment will be canceled.
7. If you CANCEL SOME, The AquaLink RS display will read PRESS <----> FOR MORE PROGRAMS ... PRESS ENTER * TO CLEAR
PROGRAMS. Use the FORWARD and BACK arrow buttons to toggle between the various programs for that Auxiliary. When the program
you want to cancel is displayed, press ENTER. That program will be canceled.
8. Repeat this process for each program to be canceled. Press CANCEL when you are finished.
1. Press the CANCEL button. Use the FORWARD and BACK buttons to advance to LABELS <—>* and press ENTER. The AquaLink RS
display will read SELECT LABEL TO BE CANCELED.
2. Press the button of the Auxiliary for which you want to cancel the label. The label will be removed (e.g., CABANA LIGHT will become
AUX 4).