An Overview Of The Control Panel - Jandy AquaLink RS Owner's Manual

Filter Pump
Button
Turns on the filter
pump and starts
water circulation.
Spa Button
Turns on the filter
pump and switches
water circulation
from pool to spa.
Equipment
Labels
Indicates generic
"AUX" labels.
Custom labels can
be added for each
from label pack.
The AquaLink ® RS can turn your pool/spa equipment on and off in two ways:
First, you can press the button of the equipment you want to turn on to activate the equipment. When the LED above a button is illuminated,
it means that equipment is on (with the exception of the heater buttons; see page 5 for more details). When the LED above a button flashes,
the equipment is being protected by a built-in safety delay (see page 14 for a description of safety delays).
Second, you can also program the equipment to turn on and off at specific times. See page 7 for a detailed explanation of how to program
equipment for automatic operation.
Display
Rotates between
messages indicating
time/date/
temperature and
status of
equipment.
Display Hold/
Release
Stops or starts the
display rotating
through messages
(i.e., time,
date, temperature).
Auxiliary
Buttons
Turns on and off
auxiliary functions.
If LED is lit,
function is on.
Heater
Buttons
Turns on and off
heaters.
If LED is green,
heater is enabled.
If LED is red,
heater is firing.