How To Use The Recording And Playback Operation Buttons - Sony SR-R1 Operation Manual

How to Use the Recording and Playback Operation
Buttons
Button
STOP button
PLAY button and indicator
REC button and indicator
38

How to Use the Recording and Playback Operation Buttons

Function when pressed alone
Stops the recording and playback
operation.
If pressed during Standby Off mode,
the unit enters STOP (Standby On)
mode.
If pressed during MEDIA IN, the
SRMemory card will be unmounted
and the unit enters the STOP state.
Tip
You can quickly switch Select FPS
ON/OFF by pressing the ENTER
button while holding down the STOP
button.
Starts playback. (The indicator is lit
during playback.)
To start recording, press this button
while holding down the REC button.
(The indicator blinks if the recording
and playback operations are not
locked.)
To start recording, press the PLAY
button while holding down this
button. (The indicator is lit during
recording.)
If pressed during Standby Off mode
while recording is stopped, the unit
enters STOP (Standby On) mode.
If you press this button during
playback or during a search, the
1)
system enters E-E mode
can monitor the E-E signal
from the HD SDI OUT (MON)
connectors 1/2.
Function when pressed with FUNC
button
If pressed during the STOP or REC
PAUSE state, the unit enters Standby
Off mode.
The immediately preceding recording
plays and enters the REC PAUSE state
(REC REVIEW).
Sets a MARK IN point in the file being
recorded or played.
and you
2)
output