Target Frame Frequencies And Signal Formats; Select Fps Function - Sony SR-R1 Operation Manual

Target Frame Frequencies and Signal Formats

The following table shows the combinations of target frame frequencies and signals formats that are
required for SR Motion shooting.
Menu settings
Format
SIGNAL FRAME
(TC)
(target
frame
frequency)
1920 × 1080 23.98
4:2:2
25
29.97
1920 × 1080 23.98
4:4:4
25
29.97
Setting example
Signal format (SIGNAL): 4:2:2
Target frame frequency (FRAME (TC)): When
23 Hz
S29/S30, or S59/S60 can be selected for "FPS
FORMAT."
These selections differ in their system
frequencies, slow motion effects, etc.
• When S29/S30 is selected
The system frame frequency is set to 29 Hz.
Input a 29PsF signal. The maximum number of
frames is 30 FPS.
• When S59/S60 is selected
The system frame frequency is set to 59 Hz.
Input a 59P signal. Since the number of frames
can be set to up to 60 FPS, this selection is
effective for further enhancing slow motion
effects.
54
SR Motion
FPS SELECT FPS System
FORMAT
S29/S30
S59/S60
S25
S50
When set to
S29/S30
ON
k
S59/S60
S29/S30
S25
S29/S30
Select FPS is a function that allows you to obtain
slow/quick motion effects by connecting the unit
to the PMW-F3, adjusting the number of frames,
and then shooting.
The number of frames recorded in 1 second is
indicated as FPS (frames per second).
The number of frames can be set in 1-FPS
increments within the range of 17 to 60 FPS.
Unit state
Format indication
frame
frequency
(Hz)
29.97 1920 × 1080
S29PsF (23PsF) 4:2:2
59.94 1920 × 1080
S59P (23PsF) 4:2:2
25 1920 × 1080
S25PsF (25PsF) 4:2:2
50 1920 × 1080
S50P (25PsF) 4:2:2
29.97 1920 × 1080
S29PsF (29PsF) 4:2:2
59.94 1920 × 1080
S59P (29PsF) 4:2:2
29.97 1920 × 1080
S29PsF (23PsF) 4:4:4
25 1920 × 1080
S25PsF (25PsF) 4:4:4
29.97 1920 × 1080
S29PsF (29PsF) 4:4:4

Select FPS Function