Sony SR-R1 Operation Manual page 61

Setting Item
REGEN SRC
RUN MODE
TCG SET DF/NDF
Time code generator (Valid only when the frame
settings related to the frequency of this system is
main time code 29.97 Hz.)
UBG SOURCE
12H/24H
Settings
Selects the time code to be synchronized (regenerated) by
the internal time code generator.
EXT L [External LTC]: Time code input to the TC IN
connector
SDI L [SDI LTC]: LTC time data of video signal input to
the HD SDI IN connectors A
SDI V [SDI VITC]: VITC of video signal input to the HD
SDI IN connectors A
Selects the run mode of the internal time code generator.
F RUN [Free Run]: Advances the time code while the
power is on.
R RUN [Rec Run]: Advances the time code only during
recording.
Sets the frame count mode.
DF [Drop Frm]: Drop frame mode
NDF [Non Drop Frm]: Non-drop frame mode
Note
This settings is valid only when TCG MODE is set to
"PRST."
Selects the source time code of user bits.
TCG [TCG Source]: Same source time code as that of the
time code generator
INT [Internal]: Time code generated by the time code
generator. Arbitrary user bits can be set regardless of
the setting of TCG (see page 35).
Selects the TIMER display mode.
12H [+/–12H]: 12-hour display mode
24H [24H]: 24-hour display mode
Note
When +/–12H display is selected, the tens digit of the
hours value is dropped for values less than 10.
61
TC Setup Menu