1. Manuals
  2. Brands
  3. Sony Manuals
  4. Voice Recorder
  5. SRR1
  6. Software upgrade

Sony SR-R1 Software Upgrade

Portable memory recorder
Hide thumbs Also See for SR-R1:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
Portable Memory Recorder
DATE: July 16, 2012
MODEL:
SR-R1
SERIAL NO:
SR-R1
10,001–10,145
SRM12-013
B-SRM12-013-0.FM
Broadcast Products
Technical Bulletin 20-2012-070
SUBJECT: SOFTWARE UPGRADE—VERSION 1.50
DESCRIPTION
Software version 1.50 is available.
NOTE:
Software cannot be downgraded.
PARTS REQUIRED
Part No.
FSRR1V150
ORDERING INFORMATION
To order upgrades, contact:
Sony SoftwarePLUS
(800) 538-7550
www.sony.com/softwareplus
NOTE:
The software is available by download only from the
SoftwarePLUS website above.
NEW FUNCTIONS
NOTE:
For more detailed descriptions of the new functions, refer
to the SR-R1 Operation Manual, 1
FPS Formats Supported
When connected to PMW-F3, the following FPS formats are
supported:
422 SQ/Lite
422 SQ/Lite
444 SQ
422 SQ/Lite
422 SQ/Lite
444 SQ
NOTE:
PMW-F3 does not support 24PsF.
NOTE:
Refer to the SR-R1 Operation Manual, 1
(Revised 3), Appendix > Connection to the PMW-F3 > Select
FPS Recording (as reproduced on pages 2 and 3 of this bulletin).
Broadcast Products Technical Bulletin 20-2012-070
Description
SR-R1 Software V1.50
®
st
Edition (Revised 3).
S29PsF(23/29PsF)
S59P(23/29PsF)
S29PsF(23/29PsF)
S25PsF(25PsF)
S50P(25PsF)
S25PsF(25PsF)
Qty.
1
st
Edition
Page 1 of 11

Advertisement

Table of Contents
loading

Related Manuals for Sony SR-R1

Summary of Contents for Sony SR-R1

  • Page 1 444 SQ S25PsF(25PsF) NOTE: PMW-F3 does not support 24PsF. NOTE: Refer to the SR-R1 Operation Manual, 1 Edition (Revised 3), Appendix > Connection to the PMW-F3 > Select SRM12-013 FPS Recording (as reproduced on pages 2 and 3 of this bulletin).
  • Page 2 B-SRM12-013-0.FM Broadcast Products Technical Bulletin 20-2012-070 Page 2 of 11...
  • Page 3 B-SRM12-013-0.FM Broadcast Products Technical Bulletin 20-2012-070 Page 3 of 11...
  • Page 4 MAP setting. NOTE: Even if the menu setting is LOCAL, the REMOTE connector is active. If RM-280 is not used for controlling SR-R1, disconnect RM-280 or turn RM-280 power OFF. Control Against File Name Duplication When File Name is set to Camera, two randomly-generated characters are added to the suffix of the file name.

  • Page 5: Operation

    3G-SDI Input/Output 3G-SDI input/output is supported. SYSTEM menu > SYSTEM FORMAT > SDI IN/SDI OUT Continuous Playback Continuous playback is supported. SYSTEM menu > PB FUNCTION > PB CONTINUE > LIST Continuous playback can be performed in order of the FILE LIST definition.

  • Page 6: Upgrade Procedure

    Prepare Software Files 1. Download the zip file from the SoftwarePLUS website: SR-R1_V1_50_SRM12-013_120531.zip 2. Extract the zip file on the PC. The following folder and files are created: /MSSONY/PRO/SRMASTER/SR-R1/ CPSR.F1.50.0104.bin (Control panel) DMSRSYS.F1.50.0162.lzh (DM SYS) DMR1FPGA10.F1.50.A04F.lzh (DM FPGA1) DMSRPROC.F1.30.0000.lzh (DM PROC) 3.

  • Page 7: Update Software

    Before upgrading SR-R1, upgrade any equipment that will be connected to SR-R1. 1. Connect the AC adapter securely to the DC IN connector of SR-R1, and mount a battery to the AC adapter if possible. SYSTEM menu > BATTERY > BATT TYPE NOTE: Confirm that the AC adapter is connected securely because the installation takes approximately 30 minutes.
  • Page 8 NOTE: The latest versions are listed in Table 1. Versions new for the V1.50 upgrade are in red. Table 1 Latest Version V1.00 (F1.50.0104) DM(SY) V1.01 (F1.50.0162) DM(FPGA1) V1.01 (F1.50.A04F) DM(PLD) V1.00 (01.00.0000) DM(PROC) V1.01 (F1.30.0000) 3. Press HOME + SYSTEM to open the DIAGNOSIS menu, select VERSION UP, and press ENTER.
  • Page 9 Figure 3 5. The All SOFT/FPGA screen appears. (See Figure 4.) Confirm that the current versions and the versions on the memory stick are correct. Select OK, and press FUNC + ENTER to execute the upgrade. Figure 4 B-SRM12-013-0.FM Broadcast Products Technical Bulletin 20-2012-070 Page 9 of 11...
  • Page 10 6. When the upgrade is completed, confirm that “Completed” appears in the lower left of the screen. (See Figure 5.) Figure 5 7. Turn power OFF and ON to restart the unit. Confirm Version Confirm that software is upgraded correctly as follows. 1.

  • Page 11: Setup Reset

    SETUP RESET CAUTION: By executing this reset, menu settings for SR-R1 are reset to the defaults. If necessary, save setup data to a memory stick first as follows: 1. Press HOME + SYSTEM to open the DIAGNOSIS menu. 2. Select SETUP > SAVE, and press ENTER.

Table of Contents