Names And Functions Of Parts; New Functions Assigned To Parts On The Control Panel; Slot Cover; Edit/Hybrid Button - Sony PDWHR1 Operation Manual

Sxs memory card adaptor
Hide thumbs Also See for PDWHR1:
Table of Contents

Advertisement

Names and Functions of
Parts
1 Memory card slots

3 Slot cover

a Memory card slots
These two slots (A and B) can receive SxS memory cards
or other recording media (see page 11).
b Access lamps
Indicate the state of slots A and B (see page 11). You can
check whether the lamps are lit even when the slot cover is
closed.
c Slot cover
Press down the OPEN (open slot cover) lever to unlock
and open the slot cover.
To close the cover, press the cover until you hear a click.
d Eject buttons
To remove the recording media from the slot, press the
eject button to release the lock, then press the button once
more. This makes the media come out of the slot partially
(see page 12).
2 Access lamps

4 Eject buttons

Names and Functions of Parts / New Functions Assigned to Parts on the Control Panel
New Functions Assigned
to Parts on the Control
Panel
When you install this board in the PDW-HR1 and update
the PDW-HR1 to Version 2.0, the functions shown in the
following figure are assigned to parts on the control panel.

1 EDIT/HYBRID button

4 CLIP COPY button
a EDIT/HYBRID button
When pressed together with the SHIFT button, puts the
PDW-HR1 into hybrid mode, in which it can access memory
cards as well as the disc.
Note
To eject a disc in hybrid mode, press the DISC button,
lighting it, and then press the EJECT button.
b MEMORY button
Selects the memory card slots as the PDW-HR1 access
target, when the PDW-HR1 has been put into hybrid mode
by pressing the SHIFT + EDIT/HYBRID button.
Immediately after the PDW-HR1 enters hybrid mode, this
button lights and the memory card slot is selected.
Note
You can switch the access target with the MEMORY and
DISC buttons only when the PDW-HR1 is in stop mode or
eject mode (no disc or memory card loaded).
c DISC button
Selects the disc as the PDW-HR1 access target, when the
PDW-HR1 has been put into hybrid mode by pressing the

2 MEMORY button

3 DISC button

SHIFT button
5 Shuttle/jog dial
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdbk-mk1

Table of Contents