Sony SR-R1 Operation Manual page 83

Code Message Meaning
W030 NO SDI No input on the HD SDI
INPUT A IN A connector.
W032 INVALID SDI Invalid input signal data
DATA on the HD SDI IN
connector.
W034 SDI A-B The phase of the HD SDI
PHASE NG IN A connector and B
connector do not match.
W035 TARGET TC The frequency of the
MISMAT target time code
configured on the unit
and the HD SDI time
code input from the
camcorder do not match.
W038 NO SDI No input on the HD SDI
INPUT B IN B connector.
W039 NO AUX No input on the AUX IN
INPUT connector.
W03A AUX IN "AUX IN" is selected in
PHASE NG the AUDIO menu, but the
input signal of the AUX
IN connector and the
video signal input to the
unit are out of phase.
W03B AUX IN "AUX IN" is selected in
UNLOCK the AUDIO menu, but the
input signal of the AUX
IN connector and the
video signal input to the
unit is not locked.
W03C HD SDI OUT 3G SDI OUT is not being
NG output properly.
W03D ENCODER Encoder initialization
NG failed.
W03E ENC Recording malfunction
WARNING (encoder error).
W03F DEC Cannot playback data
WARNING from SRMemory card
(decoder error).
W050 WP SW ON The SRMemory card
write-protect switch is set
to WP.
W051 FS LOCKED The SRMemory card is
set to FS LOCK in the
SYSTEM menu.
W054 CONDITION Detected an SRMemory
NG card access error.
W055 PB NOT Not ready for playback.
READY Playback the file again.
Code Message Meaning
W057 REC A prohibited command
TRIGGER was executed from the
MODE control panel while REC
TRIGGER is not set to
OFF.
W073 CAM ID The Camera ID
MISMATCH configured in FILE LIST
>CAMERA ID of the
SYSTEM Setup menu
does not match the card
information.
Error Messages and Warning Messages
83