Chapter 2 : Preparation; Work Flow; Mount Control Panel - Sony SR-R1 Operation Manual

Preparation
2
Chapter

Work Flow

The steps that are required before starting to use
the SR-R1 are listed below.
Mount control panel (page 15)
Connect power (page 16)
Connect HD SDI compliant equipment (page 19)
Turn power on (page 23)
Insert SRMemory card (page 24)
Tip
A Phillips (cross head) screwdriver is required for
mounting the control panel.

Mount Control Panel

Attach the supplied CP bracket to the unit, and
connect the unit and the control panel with the
control panel cable.
1
Attach the supplied CP bracket to the
right side of the unit.
2
Slide the control panel into the CP
bracket.
Work Flow / Mount Control Panel
15