Playback; Jog Mode; Shuttle Mode; Standby Off Mode - Sony SR-R1 Operation Manual

Playback

1
Insert the SRMemory card to play
back.
For details, see "To insert the SRMemory card"
(page 24).
2
Press the PLAY button.
Playback starts and the PLAY LOCK
indication lights up.
3
Press the STOP button when you want
to stop playback.
To play back files contiuously
Display the SYSTEM Setup menu, and set PB
FUNCTION >PB CONTINUE to "LIST."
The files will be played in order according to the
FILE LIST >SORT setting of the SYSTEM Setup
menu.
To play back files seamlessly
Display the SYSTEM Setup menu, set PB
FUNCTION >PB CONTINUE to "LIST," and
then set PB FUNCTION >SEAMLESS to
"LIST."
The files will be played in order with smooth
transitions (i.e., without freeze frames) between
each file.
Notes
• Files with frequency formats that differ from the
system format cannot be played back.
• Audio data and metadata will not be output for files
with durations of 10 frames or less (20 frames or less
if the frame frequency is 50P or higher).
• Files will be forcibly closed when you change the
SEAMLESS setting or FILE SORT setting.
• When this function is used in conjunction with repeat
playback, the image will freeze for an instant during
the transition between the last and first files in the list.
• The SEAMLESS setting is disabled during Select FPS
format.
36
Playback Preparations and Operations

Jog Mode

Performs variable speed playback according to
the speed at which the ADJUST knob is turned.
1
Press the PAUSE button in the HOME
screen during playback to enter the
PLAY PAUSE state.
You can also perform this during shuttle
playback.
2
Turn the ADJUST knob.
Jog playback is performed according to the
speed at which the knob is turned.

Shuttle Mode

Performs variable speed playback according to
the position of the ADJUST knob and the speed at
which it is turned.
1
Press the PAUSE button during
playback to enter the PLAY PAUSE
state.
You can also perform this during jog
playback.
2
Turn the ADJUST knob while pressing
the FUNC button.
Shuttle playback is performed according to
the position of the knob and the speed at
which it is turned.
The playback state will remain in shuttle
mode even if you release the FUNC button
and the ADJUST knob.

Standby Off Mode

During the REC PAUSE or STOP state, if you
press the STOP button while holding down the
FUNC button or if the duration specified with the
SYSTEM >POWER >STBY OFF setting
elapses, the unit will enter Standby Off mode.
(Under the "Disable" default setting, the unit does
not enter Standby Off mode.)
The status indication will change as follows when
the unit enters Standby Off mode: "REC PAUSE"
t "REC PAUSE*" or "STOP" t "STBY OFF"
During Standby Off mode, the files on the
SRMemory card will be closed, the SRMemory