Changing The File Display Order; Restricting File Access - Sony SR-R1 Operation Manual

Note
Locked files cannot be deleted.
To lock a file
You can lock individual files to prevent
accidental deletion.
Select and confirm PROTECT to display the
confirmation screen.
When you select [OK] and then press the
SELECT/ENTER dial while holding down the
FUNC button, the file is locked and a lock icon
appears.
Locked files cannot be deleted.
To unlock a file, select the locked file and
perform the procedure for locking a file.
Note
If you format an SRMemory card that contains locked
files, the locked files will also be deleted. Locking a file
does not guarantee total prevention of file loss.

Changing the File Display Order

The display order of files in the file list can be
changed.
1 Select and confirm [SORT] t2 select and
confirm the sort method.
1 SORT
S Y S T E M S e t u p
FILE LIST
SYSTEM FORMAT
INGEST
PB FUNCTION
TEST SG
LCD
KEY MAP
KEY INHI MAP
REMOTE/LOCAL LCL
REC INHI OFF
POWER
BATTERY
SRMemory
OTHERS
S R -R 1 S T O P
DATA: Displays the files in date order.
NAME: Displays the files in file name order.
DURATION: Displays the files in recording
time order.
Selections marked with an asterisk (*) indicate
reverse order.
File List
FILE LIST
SORT Data
SELECT All
FILENAME DEFAULT
CAMERA ID A
REEL NO. 001
00 :0 0: 00 : 00
TC R
2Sort method
To change the signal format of the
system according to the file playback
format
To properly play back files that cannot be played
in the current system format (i.e., files displayed
in gray or files for which the converted playback
icon appear), the system settings must be changed
according to the files.
You can quickly change the system settings as
follows.
1
Select the file, and press the SELECT/
ENTER dial while holding down the
STOP button.
The SYSTEM Setup menu opens with the
state of each item matching the format of the
file.
Note
If you selected a file for which playback is not
supported on this unit, the menu will not open.
2
Verify the format that will be set, and
select and confirm "OK."
The format is changed.

Restricting File Access

In SDI INGEST mode, only the flagged files
specified in the SYSTEM Setup > FILE LIST >
SELECT menu can be operated.
For details on SDI INGEST mode, see "SDI INGEST
Mode" (page 48).
FILE LIST Operations
45