File Naming System - Sony SR-R1 Operation Manual

5
Review.
1 To play back with the target frame
frequency at 23.98PsF, set "Select
FPS" to "OFF" under "SYSTEM
FORMAT."
2 Move the cursor to [SET] and confirm
to change the format of the unit.
3 Load the recording file from the file list
and press the PLAY button to start
playback.
You can check the slow motion shooting
effect at the target frame frequency of
23.98PsF. The time code advances from 0 to
23 frames per second. You can also perform
simple playback without checking the
motion effects.
To perform simple playback without checking the
motion effects
Press the PLAY button after shooting to play the
last recorded file.
Simple playback allows you to check recorded
video in fewer steps than normal playback.
However, it does not allow you to check the slow
motion effects.
Note
When OTHERS >REC TRIGGER is set to "SYNCHRO
REC" in the SYSTEM Setup menu, control panel
operations are disabled.
To turn Select FPS on/off quickly
In the HOME screen, press the SELECT/ENTER
dial while holding down the STOP button.
The SYSTEM Setup menu will open with the
changed Select FPS status.

File Naming System

The files created during recording will be named
using the following naming system.
Example:
D003C004_120325E5
1 2 3
1 Camera ID
The camera ID configured in "CAMERA ID"
under "FILE LIST" of the SYSTEM Setup menu.
2 Reel number
The reel number configured in "REEL NO."
under "FILE LIST" of the SYSTEM Setup menu.
If you change only the camera ID setting, the reel
number will be changed to "001."
3 Shot Number
A sequentially assigned shot number starting with
"001." If the shot number reaches "999," the letter
at the front of the number changes to the next
letter in the alphabet. For example, "C999" will
be followed by "D001."
4 Date
The shooting date (year, month, day) of the file.
5 Random characters
A random pair of characters (0 to 9, A to Z).
Tips
• If a file that was recorded in "CAMERA" mode exists
on the inserted SRMemory card, subsequent file names
will continue from the existing files.
Example: If the "B002C003_XXXXXXXX" exists on
the SRMemory card
The next file that is created will be named
"B002C004_XXXXXXXX." In this case, the
camera ID setting for the control panel will change
to "B" and the reel number setting will change to
"002."
"(NEXT) file name" also blinks in the operation
status and warning indicator if the camera ID and
reel number differ from those of the control panel.
For details on warning messages, see "About
Warning Messages" (page 81).
4 5
File Naming System
57