A L A R M R E C O R D I N G S E T U; P A N I C R E C O R D I N G S E T U - Ganz Digimaster Series DR8HRD Instruction Manual

RECORD SETUP
ALARM RECORDING SETUP
This menu screen allows the user to configure alarm-activated recording.
There are 2 sections to this menu:
SIZE / FPS / QUALITY: Recording settings for each channel can be defined across a 24-hour period, in blocks
ACTIVATION: This section determines at what times the DVR will record and whether it is set to continuous or motion.
NOTE: Please refer to the instructions for the 'CONTINUOUS / MOTION RECORDING' menu for details on setting
up the 'SIZE / FPS / QUALITY' and 'ACTIVATION' tabs within the 'ALARM RECORDING' menu.
Alarm-activated recording can be used in conjunction with the 'CONTINUOUS / MOTION RECORDING' menu.
The DVR can be configured to record continuously at a low image rate ('CONTINUOUS / MOTION RECORDING' menu),
and then increase to a higher image rate during an alarm condition. ('ALARM RECORDING' menu)
PANIC RECORDING SETUP
During a Panic Recording condition, the DVR will override all other recording settings and record continuously on
all channels as per the settings configured here.
(for example between 09:00 and 18:00) or for each individual hour.
Click on the 'ALARM RECORDING' submenu.
The layout of this menu is very similar to the
'CONTINUOUS / MOTION RECORDING' menu.
Click on the 'PANIC SETUP' submenu.
Click on the SIZE, FPS, QUALITY and AUDIO.
55