Signal Level Alarm - HIKVISION DS-9504NI-S User Manual

Step5: Set the alarm linkage for motion detection and select
alarm output channel.
Alarm Linkages Description:
Linkage
Warning on Monitor
Audio Warning
Upload to Center
E-mail Linkage
Trigger Alarm Output

9.4.2 Signal Level Alarm

Step1: The same with the Step1 of Section 9.3.4 Alarm Recording.
Step2: The same with the Step2 of Section 9.3.4 Alarm Recording.
Step3: The same with the Step3 of Section 9.3.4 Alarm Recording.
Step4: The same with the Step4 of Section 9.3.4 Alarm Recording.
Step5: Set the alarm linkage for signal level and select alarm
output channel.
When the alarm signal is detected, the image of corresponding channel will pop out as
single screen.
Alarm triggers buzzer
Upload the alarm signal to the center, such as client software
When the alarm signal is detected, the client software will send the email to the
designated mailbox.
Trigger alarm output of the device; if the device is 9000 series, triggering alarm output
of IP channel can be selected as well.
46
Description