Figure 9.3
Tick a box in front of the listed camera and click OK to finish.
9.2.2 Single Add of IP camera
This function enables you to add a single IP camera quickly. When there are supported IP cameras in the same network
segment of a LAN with NVR, you may add it in one button with default user name, password and port number.
Note:
Before applying Single Add function, please make sure that IP camera is compatible with NVR and default
user name, password, port number are not changed.
First, select a Channel No. then click
and the on-line IP cameras will be listed as figure below shown:
36