Motion Detection Recording - HIKVISION DS-9504NI-S User Manual

In the "Advanced Record Settings", you may configure
parameters of Pre Record time, Post Record time, Recordings
Duration, Redundant Recording and whether to record audio.

9.3.3 Motion Detection Recording

Go to Motion Detection page:
Figure 9.8
Note:
If you are using IP camera that is not from Hikvision, please setup this function by using its own software.
Step1: Select Channel No. for motion detection recording.
Step2: Enable motion detection by tick the box.
Step3: Then you can click settings buttons to set area, arm schedule and linkage.
41