HIKVISION DS-9504NI-S User Manual page 13

Figure 2.1.2
Step 4: Serial port setup.
Set port parameters in "COM1 Properties" dialogue box as follow: (Fig 2.1.3)
Figure 2.1.3
The parameters should be:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Press "Apply" and "OK" after the setup. Press "Enter" under Hyper Terminal interface. When "[root@dvrdvs/]#"
appears, the connection is established.
12