Starting And Shutting Down Your Nvr - HIKVISION DS-9504NI-S User Manual

DS-9516NI-S Front Panel:
Name
No.
Power
Status
Alarm
LED
TX/RX
1
Indicators
HDD
Ready
Backup
Backup Button
2
USB Ports
3
Power Button
4
Channel Status
5
Indicators

1.2 Starting and Shutting Down Your NVR

Power On
If the power LED indicator on the front panel is off, please plug the power supply into an electrical outlet, the LED
should turn red, indicating the unit is receiving power.
When the LED is red, please press the Power button on the front panel. The Power indicator will turn blue. The unit
will begin to start.
Note:
DS-9500NI-S series NVR do not have local output, when Ready indicator turns blue, that means the unit is
power on and ready to be configured.
Turning red indicates power supply but without system running, turning blue
indicates power supply and system running.
Alarm indicator turns red when a sensor alarm is detected.
TX/RX indictor blinks blue when network connection is functioning properly.
HDD indicator blinks red when data is being read from or written to HDD.
Ready indicator turns blue when NVR is functioning properly.
Backup indicator blinks blue when data is being backup.
Backup video files.
Universal Serial Bus (USB) ports for additional devices such as USB mouse and
USB Hard Disk Drive (HDD).
Powers NVR on/off.
Blue indicates recording, red indicates network connection, purple indicates
recording & network connection.
8
Description