Hyper Terminal Setup - HIKVISION DS-9504NI-S User Manual

DS-9500NI-S Series NVR are mainly for IPC, DVS network video storage and playback. Network configurations are
needed before operating, including: IP address, subnet mask, gateway and port.
Note:
The factory default username is admin, password is 12345.
The factory default IP address of DS-9500NI-S series is 192.168.0.1.

2.1 Hyper Terminal Setup

The common method is to connect NVR and PC with serial line, run Hyper Terminal and modify parameters with serial
command. Please connect the RS-232 port of NVR with the COM port of PC directly, power on the NVR and PC and
follow the steps:
Step 1: Enter Hyper Terminal.
Click "Start"-> "Programs" -> "Accessories" -> "Communications" -> "Hyper Terminal" in Windows system, and the
dialogue box below will appears as Figure 2.1.1.
Figure 2.1.1
Step 2: Name the connection and define the icon.
Input a name (e.g. HK), select an icon, and press "OK" to enter "Connect To" dialogue box.
Step 3: Select the communication port.
Select "COM1" in "Connect To" inter face (Please select the COM port according to the reality, in case PC has more
than 1 COM.) Press "OK" to enter "Properties" dialogue box.
11