Figure 2.2.1
Commands
Utilities
helpm
Console help command is used to print common commands, show as Figure 2.2.1.
getIp
Show the current IP address of NVR. Command format: getIp "Enter".
Setup NVR IP address. Command format: setIp IP: mask
setIp
e.g. setIp 192..168.1.11:255.255.255.0
getPort
Show the current port of NVR. Command format: getPort "Enter".
Setup NVR port. Command format: setPort Port
setPort
e.g. setPort 9000
getGateway
Show current NVR gateway address. Command format: getGateway "Enter".
Setup NVR gateway. Command format: setGateway Gateway
setGateway
e.g. setGateway 192.168.1.1
14