Cutting Depth Balance Adjustment - Horizon Fitness Horizon PC-45 Instruction Manual

6-4 Cutting Depth Balance Adjustment

Cutting depth balance adjustment is required
when cutting pressure is not the same in left
and right sides.
WARNING
- Handle knife with utmost care. Do
not touch knife.
CAUTION
- After adjusting cutting depth balance,
knife height adjustment is required in
some case.
1.
Open left adjustment section cover.
2.
Loosen lock bolt with allen wrench.
3.
Insert allen wrench into balance adjust
shaft hole and adjust knife height.
NOTE
- The left side of knife rises/lowers by turning
balance adjust shaft.
4.
Fasten lock bolt with allen wrench.
5.
Close cover of adjustment section.
Left Adjustment Section Cover
Balance Adjust Shaft Hole
Up
Down
35
6. Maintenance
Lock Bolt
Up Down
Knife