3. Operation Procedure
3-1 Operation Procedure
12.
Make sure knife has returned to home
position after cutting.
13.
Release your hands from cut buttons.
14.
Turn off power with key switch.
15.
Open front cover and remove trimmings on
table.
16.
Loosen clamper hand wheel by turning it
counterclockwise.
17.
Take cut sheets out of table.
18.
Repeat procedure 1 to 14. Back gauge is
not required to adjust in the case of the
same cutting width.
Front Cover
Clamper Hand Wheel
Cut Sheets
16
Trimmings