Horizon Fitness Horizon PC-45 Instruction Manual page 21

3-1 Operation Procedure
7.
Open front cover and pile sheets on table.
8.
Square-up sheets with back gauge and side
gauge.
9.
Turn clamper hand wheel, and clamper
will press sheets to fix them.
NOTE
- Be careful not to shift sheets when fixing
sheets.
10.
Close front cover.
11.
Continue to press cut button A and B at
the same time, and knife lowers and cuts
sheets. You may release cut buttons when
knife begins to rise because knife returns to
home position automatically.
NOTE
- If you fail to press both cut buttons at the
same time, release your hands from buttons
and try it again 2 seconds later.
- If you release your hand(s) from cut
button(s) while knife is lowering and cutting
operation is stopped, press cut button A and
B separately with the interval of 0.5 seconds
or more, and knife returns to home position.
Sheets
Back Gauge
Clamper Hand Wheel
Clamper
Front Cover
Cut Button A
15
3. Operation Procedure
Side Gauge
Knife
Cut Button B