Test Cutting - Horizon Fitness Horizon PC-45 Instruction Manual

6. Maintenance

6-5 Test Cutting

Check on knife cutting condition.
WARNING
- Do not put your hands and fingers
under knife. Otherwise you may be
injured seriously.
- Do not put your hands under knife
while power is on.
- Assign only "ONE" operator to oper-
ate PC-45.
- It is dangerous to remain knife on
half position for fear of cutting hands
or fingers. Make sure to return knife
to home position.
1.
Place sheets on both edge of table one by
one.
2.
Turn power on with key switch.
3.
Press the Standby button.
- Check that the Standby button lights.
4.
Operate PC-45 referring to "3-1 Operation
Procedure".
5.
If both sheets are left uncut partially,
adjust knife height again. (Page 32)
6.
If either paper is left uncut partially, adjust
knife height.
Sheets
36
Standby Button