Check On Unworkable Knife With One Hand; Check On Stop During Working - Horizon Fitness Horizon PC-45 Instruction Manual

2-3 Check on Safe Functions

2-3-5 Check on Unworkable Knife with One Hand

Check that knife work only when both cut
buttons A and B are pressed at the same time.
1.
Check that knife does not work by press-
ing only cut button A.
2.
Check that knife does not work by press-
ing cut button B with cut button A pressed.
NOTE
- Knife works only when both cut buttons A
and B are pressed at the same time (within 5
seconds).
3.
Release your hands from cut buttons.
4.
Check that knife does not work by repeat-
ing procedure 1 to 3, exchanging A with B.

2-3-6 Check on Stop during Working

WARNING
- Do not raise clamper when knife is
stopped during cutting. Otherwise
knife gets bare and, as a result, your
fingers might be cut with knife.
Check that knife is stopped when you release
your hand from even one cut button during
lowering knife.
1.
Check that knife is stopped immediately
when you release your hand from cut
button A while knife is lowering after you
press cut button A and B at the same time.
2.
Release your hands from cut buttons.
3.
Press cut button A and B separately with
the interval of 0.5 seconds or more to
return the knife to the home position.
Cut Button A
NOTE
- Knife can return to home position by press-
ing cut button A and B separately with the
interval of 0.5 seconds or more when knife is
stopped on the way to bottom.
4.
Repeat procedure 1, exchanging A with B.
Cut Button A
11
2. Safety Function Check
Knife
Cut Button B
Knife
Cut Button B