6-6 Lubrication (Monthly)
Lubricate the following sections to maintain
PC-45 in the best condition.
1.
Turn on power with key switch.
2.
Press the Standby button.
- Check that the Standby button lights.
3.
Turn clamper hand wheel to lower
clamper to the surface of table.
4.
Press cut buttons A and B to lower knife.
Release cut buttons when clearance be-
tween knife and cutting stick is about 5
mm, and knife will stop.
5.
Turn off with key switch.
6.
Open adjustment section covers (right and
left).
7.
Lubricate sliding faces between marks.
8.
Close tops of lubricate section.
Cutting Stick
5mm
Cut Button A
Adjustemt Section Covers
Lubricate Section
37
6. Maintenance
Knife
Standby Button
Cut Button B
Lubricate Section