Original Condition; Power Off - Horizon Fitness Horizon PC-45 Instruction Manual

4. After Cutting

4-1 Original Condition

Clamper must be lowered to the bottom after
finishing operation.
1.
Lower clamper to the bottom by turning
clamper hand wheel clockwise.
2.
If knife remains on half way, press cut
button A and B separately with the interval
of 0.5 seconds or more to return the knife
to the home position.

4-2 Power off

Power is turned off.
WARNING
- Only authorized operators should
have access to key switch.
1.
Turn off power by turning key switch
counterclockwise.
- When turning on the power again, turning
it on after the Standby button completely
goes out.
2.
Pull out key and keep it.
Clamper Hand Wheel
Clamper
Cut Button A
Key
E R
P O W
O N
O F F
Key Switch
18
Cut Button B
E R B
C U T T
Standby Button