Scanning Documents
–
Touch [Detail Search], and then type in the name of the destination
or part of the address to search for the corresponding address.
–
Touch [LDAP Search] to search the addresses registered on the
LDAP server for the address that corresponds to the specified con-
ditions.
Why is [LDAP Search] not displayed on the Address Book tab?
?
% If the [Manual Destination Input] on the Security Details screen (dis-
played by touching [9 Security Setting] on the Administrator Setting
screen) is set to [Restrict], [LDAP Search] does not appear on the
Address Book tab. For details on LDAP searches, refer to "Perform-
ing an LDAP Search" on page 2-15.
To perform LDAP searches, what settings are required?
?
% Administrator settings such as the LDAP sever setting are required.
For details, refer to "Performing an LDAP Search" on page 2-15.
3
Touch the button for a destination to select it.
The selected buttons are highlighted, and the selected destinations are
listed under "Broadcast Destinations". Other destination addresses
can be added through direct input.
IC-402
2
2-13