Table of Contents
Advertisement
Before Using the Scan Functions
1.4
Settings for Scanning
Specifying the Scan Settings
The following scan settings can be specifying when scanning a document.
These settings are specified from the touch panel of the copier.
Item
File Type
Resolution
Simplex/Duplex
Color
Scan Size
Brightness
Background Removal
Original Setting
Application
Separate Scan
File Name
!
Detail
For details on the scan settings, refer to "Specifying the Scan Settings"
on page 2-52.
An annotation user box cannot be selected if the image controller is in-
stalled. For details on the Box functions, refer to "Copier Box Functions"
on page 1-7.
Specifying the Destination
Specify the destination (recipient) for the scan data. If the destination has
been registered in advance, select a destination from those that are already
registered. If the destination has not been registered, specify the destination
through direct input.
IC-402
Description
Sets the file type to be saved.
Sets the scan resolution.
Selects whether to scan one side of the document or both sides.
Sets the color of the scanned document.
Sets the size to be scanned.
Adjusts the brightness of the document.
Adjusts the density of the background (blank areas) of the docu-
ment.
Specifies the type and characteristics of the loaded document.
Provides functions for adjusting the print image, for example, for
scanning books and for erasing the surrounding area.
The scan operation can be divided into several sessions when all
pages of a document cannot be loaded into the automatic docu-
ment feeder or when placing the document on the original glass. In
addition, the documents can be scanned separately according to
their type, such as when single-sided documents are mixed with
double-sided documents.
Changes the file name to be saved.
1
1-10
Advertisement
Table of Contents
