Table of Contents
Advertisement
Using PageScope Web Connection
Item
Center Erase
Bind Destination
Erase
When "Group" is selected
Item
No.
Name
Group
Resolution
File Type
Scan Setting
Subject
Text
Simplex/Duplex
Brightness
Color
Separate Scan
Background Removal
Scan Size
E-Mail Notification
Destination
File Name
Original Direction
Bind
Special Original
IC-402
Description
Specify the width of the center of the document spread that is
to be erased when "Book Scanning" is set to "ON" and "Book
Spread" is selected beside "Method".
Specify the binding position when "Book Scanning" is set to
"ON" and "Book Separation" is selected beside "Method".
Specify the width of the perimeter of the document to be
erased.
Description
Enter the registration number.
Enter the registration name (up to 24 characters).
Click
, and then select a group destination from the list to
display the group number.
Select the resolution.
Select the file format.
Select the unit of the data to be saved.
Specify the subject (Not Specified, 1 to 10). When "Not Spec-
ified" was selected, the default title is used. Click
the contents.
Specify the text (Not Specified, 1 to 10). When "Not Specified"
was selected, the default text is used. Click
contents.
Select "1-Sided", "2-Sided", or "Cover + 2-Sided".
Select the brightness.
Select the color mode. The file formats that can be saved may
be limited depending on the color settings. For details, refer to
"File Type" on page 2-54.
Select "ON" or "OFF".
Adjust the background darkness.
Select the original size ("Auto", "Standard Size", "Custom
Size").
For "Custom Size", specify the horizontal and vertical
scanning sizes.
The upload destination of the file can be notified to the spec-
ified address.
Click
to select the notification addresses.
Enter the file name (up to 26 characters).
Select the orientation of the original document.
Select the original binding position.
Specify whether to specify a mixed original document.
7
to check
to check the
7-28
Advertisement
Table of Contents
