Table of Contents
Advertisement
Specifying Network Scanning Settings
5.5
Specifying Settings for FTP File Transmissions
Checking TCP/IP Settings
In the setup screen for the image controller, select [Network Setup] — [Pro-
tocol Setup] — [TCP/IP Setup] to check whether or not transmissions are
permitted with the TCP/IP protocol. If it is not permitted, specify the setting
that allows transmissions with the TCP/IP protocol.
Enabling the FTP Transfer Function
1
Show the setup screen from the image controller operation panel.
2
Select [Network Setup] — [Service Setup] — [FTP Setup] — [Scan to
FTP] and enter the following settings.
Item
[Enable Scan to FTP]
Proxy Settings
Enter proxy settings as necessary. (Consult your network administrator to
see if proxy settings are required and the setup details.)
1
Show the setup screen from the image controller operation panel.
2
Select [Network Setup] — [Service Setup] — [FTP Setup] and enter the
following settings.
Item
[Enable Proxy Setup]
[Proxy Server IP Ad-
dress]
[Proxy Server Port
Number]
[Proxy Server Timeout
(sec)]
[Proxy Server user name]
[Proxy Server user pass-
word]
IC-402
Description
Select [Yes].
Description
Select "Yes" to enable the proxy settings.
Enter the IP address of the proxy server.
Specify the port number of the proxy server.
Set the timeout value.
Enter the user name of the proxy server.
Enter the password of the proxy server.
5
5-10
Advertisement
Table of Contents
