Specifying Network Scanning Settings
5.7
Setting the Error Notification Destination
You can carry out the following steps to specify the destination to notify er-
rors when mails transmitted using the Scan to E-mail or URL notification
function do not reach the destination address. However, if the mail is not
transmitted, the error is not notified.
To set the error notification destination
1
Show the setup screen from the image controller operation panel.
2
Select [Network Setup] — [Service Setup] — [E-mail Setup] and enter
the following settings.
Item
Administrator Email User
Name
[Administrator Email Do-
main Name]
Note
Administrator Email User Name@Administrator Email Domain Name is
the error notification destination.
IC-402
Description
Specify the E-mail user name of the controller administrator.
Specify the mail server domain name to which the administrator be-
longs.
5
5-12