Scanning Documents
3
Select the desired destinations, and then touch [OK].
The selected destinations are listed under "Broadcast Destinations".
4
Touch [Scan Settings], and then specify the scan settings.
–
For details on the scan settings, refer to "Specifying the Scan Set-
tings" on page 2-52.
5
After specifying the settings, touch [OK].
–
To send the data to another destination at the same time, touch
[Address Book] or [Direct Input] to specify or add other destina-
tions.
–
If a destination registered in a program is added, the scan settings
registered in the program are given priority, and the scan data is
sent with the scan settings registered in the program.
IC-402
2
2-10