Connecting And Configuring Additional Pcs (Optional) - Siemens Giga762SX User Manual

First steps

Connecting and configuring additional PCs (optional)

Once you have configured one PC as described above you can connect additional PCs to
the Giga762SX WLAN dsl. You will need an additional cable for each PC you want to con-
nect via cable. For the wireless connection of additional PCs, you will need a wireless
network adapter.
Wireless
ì
Install wireless network adapters in each other PC as described in the corresponding
user guide, making sure that the SSID of all wireless network components
(Giga762SX WLAN dsl and network adapters) is identical.
If you have not changed the SSID in the Basic Setup Wizard wizard or via WPS, the
default setting can be found at the label on the bottom of the device. Else you will
find the created SSID in the Advanced Settings of the user interface (see page 85).
You can see the preset pre-shared key at the label on the bottom of the device or also
via the user interface in the Advanced Settings menu (see page 88). You use this
information to manually configure PCs without WPS.
PCs with WPS can be connected wirelessly via WPS (see page 33 and page 87).
ì
If necessary, set up the network for each newly connected PC (page 35).
Wired
ì
Connect the network cards of each additional PC to a free LAN port (LAN1 – LAN4)
on the Giga762SX WLAN dsl using an Ethernet cable.
ì
Make sure that the corresponding LAN LED on the front of your Giga762SX WLAN
dsl flashes.
ì
If necessary, set up the network for each newly connected PC (page 35).
ì
Reboot the additional PCs.
36