Siemens Giga762SX User Manual page 22

First steps
LED State
On
Phone 1/
Flashing
Phone 2
Off
The Giga762SX WLAN dsl can be set up in any suitable location in the home or office.
You do not need any special wiring. However, you should comply with the following
guidelines:
u
Operate the Giga762SX WLAN dsl only indoors within a temperature range of 0 to
+40 °C. Do not position the Giga762SX WLAN dsl near sources of heat. Do not cover
the ventilation slots. High temperatures can damage the device.
u
A mains socket for 220/230 V~ and a connection socket for the splitter or LAN must
be available in the place where you set up the Giga762SX WLAN dsl.
u
Do not position the device in the immediate vicinity of stereo equipment, TV sets,
microwave ovens or the like. This may cause interference.
u
Position the Giga762SX WLAN dsl so that it is as near to the centre of your wireless
network as possible. The general rule is: The higher you place the antennae, the bet-
ter the performance. Make sure that the place where you position the Giga762SX
WLAN dsl offers optimum reception throughout the house, apartment or office.
u
Position the Giga762SX WLAN dsl so that it cannot fall down and damage the anten-
nae. Position the Giga762SX WLAN dsl on a non-slip surface.
u
Do not place the Giga762SX WLAN dsl on any furniture surface that could be
affected by the heat from the device.
u
Lay the cables so that nobody can trip over them. You should not cover the cables
with anything.
Please remember:
Network connections (LAN) via cables and telephone lines may only be set up with
the Giga762SX WLAN dsl within enclosed rooms.
24
Status
The receiver of the phone connected to the port has been
lifted.
The phone is ringing and a call is being received or a call is
being conducted.
No phone is connected or the connection is idle.