The Start Screen - Siemens Giga762SX User Manual

The user interface
ì
Click OK.
Note:
For security reasons you should change this password at a later stage (page 52).
A page with security information will appear. You can skip this when configuring the
device for the first time. If you carry out all the general and security settings using the
wizard as described below, your device and network will be fully protected. If not, the
next time you log on you will be informed of security gaps in the configuration program.
ì
Click OK.

The start screen

The start screen is the starting point for all configuration and administration proce-
dures.
Start screen functions
You can start the following actions on the start screen:
u
Select the language for the user interface (page 40).
u
When you have configured an Internet connection for the first time, you can view
the selected connection service and the status of the Internet connection, choose a
different connection service and set up or close an Internet connection (page 40).
The start screen shows the status and also the button Connect or Disconnect.
u
Open the Status menu to obtain status information about the Giga762SX WLAN dsl
(page 130).
u
Call up the wizard for the basic configuration (Basic Setup Wizard see page 42),
u
Call up the Security Setup Wizard (page 50).
u
Open the Advanced Settings menu for additional configuration options (page 60).
You can call up the wizards, the Advanced Settings menu and status information at any
time and on any user interface screen using the tabs at the upper margin of the user
interface.
38