Access Control Within The Wireless Network - Siemens Giga762SX User Manual

Security Setup Wizard

Access control within the wireless network

In this step you can specify which PCs will have wireless access to the Giga762SX WLAN
dsl and hence to the LAN. Access control is based on the
adapters. You can enter the MAC addresses for the PCs manually or select these from the
list of PCs that are currently logged in.
Access control is disabled by default. This means that all PCs that use the correct
can be logged in.
ì
Next to the MAC address filter, select On to activate the MAC filter.
Entering MAC addresses manually
ì
Enter the MAC address of the network adapter. You will find this address on the
underside of the device.
ì
Enter the name of the PC.
ì
Click the Add button to add the entry to the list.
Selecting from the list of logged-in PCs
ì
Select the required PC from the Known wireless clients list. All PCs that were
already entered manually on the router with the MAC address are displayed.
ì
Click the Add button to add the selected PC to the list.
58
MAC address of the PC network
SSID