Table of Contents
Advertisement
Contents
The Giga762SX WLAN dsl . . . . . . . . . . . . . . . . . . . . . 7
Do your part for the environment (ECO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Local area networks with Gigaset products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Wired local area network (Ethernet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Wireless local area network (WLAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Linking a wireless network to an Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Extending the wireless network coverage with a repeater . . . . . . . . . . . . . . . . . . 14
Internet telephony and connecting analogue phones . . . . . . . . . . . . . . . . . . . . . . . . 14
WPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Features and applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Overview of the installation steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setting up the Giga762SX WLAN dsl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting and activating the Giga762SX WLAN dsl . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ports on the rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Connecting to the splitter data port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connecting to the analogue phone port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting to the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting wired to the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting to the mains power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting wireless to the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Checking the operating state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Network configuration of the PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Making the basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connecting and configuring additional PCs (optional) . . . . . . . . . . . . . . . . . . . . . . . . 36
The user interface . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Starting the user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
The start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Connecting to the Internet manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Elements in the user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Contents
3
Advertisement
Table of Contents
Related Manuals for Siemens Giga762SX
Summary of Contents for Siemens Giga762SX
-
Page 1: Table Of Contents
Setting up the Giga762SX WLAN dsl ........ - Page 2 Contents Basic Setup Wizard ......42 Regional Options ........... . . 43 Configuring Internet connections .
- Page 3 Contents USB ............. . . 108 File Server .
- Page 4 Contents Using the data on a USB mass storage device ......152 Checking network services .
-
Page 5: The Giga762Sx Wlan Dsl
(ADSL /ADSL2+) enabling you to access the Internet easily. You can connect your PC wirelessly to the Giga762SX WLAN dsl and create a wireless local area network (WLAN). For network security, wireless transmission can be encrypted using the WPA/WPA2 standard or 64/128-bit WEP. -
Page 6: Do Your Part For The Environment (Eco)
The Giga762SX WLAN dsl The Giga762SX WLAN dsl has an extensive range of functions but remains simple to use. It can be configured and operational within a few minutes. Note: This user guide is based on the software release 2.3. -
Page 7: Local Area Networks With Gigaset Products
The Giga762SX WLAN dsl Local area networks with Gigaset products You can use the Siemens Giga762SX WLAN dsl to set up a local area network, for exam- ple a home network. All PCs in this network can communicate with each other and have access to the Internet. -
Page 8: Wired Local Area Network (Ethernet)
For older PCs you need to install an Ethernet network card. The PC and the Ethernet LAN port on the Giga762SX WLAN dsl are connected using an Ethernet cable (CAT5). There is one supplied. You can obtain additional Ethernet cables from your retailer. -
Page 9: Wireless Local Area Network (Wlan)
Giga762SX WLAN dsl. In infrastructure mode, the stations in the network always com- municate via this access point. The access point sets up the wireless network on a per- manent basis. - Page 10 The Giga762SX WLAN dsl Linking wireless networks with the Internet The Giga762SX WLAN dsl has an ADSL interface that permits all stations within its local area network to access the Internet simultaneously. To be able to use this functionality, you need a DSL connection obtainable from an Internet service provider. Find out whether your service provider supports parallel access by several PCs.
-
Page 11: Linking A Wireless Network To An Ethernet
WLAN (wireless) Access Point Ethernet (wired) The Giga762SX WLAN dsl has four Ethernet interfaces (LAN ports). Up to four PCs can be connected directly to these LAN ports. All PCs can access the Internet via the Giga762SX WLAN dsl. Please remember: You can also connect an Ethernet router or switch to a LAN port to access a larger Eth- ernet. -
Page 12: Extending The Wireless Network Coverage With A Repeater
The type of calls that are cheaper for you will depend on what calls you make and when you make them, and the rates offered by your service provider. The Giga762SX WLAN dsl gives you com- plete freedom of choice at any time. -
Page 13: Wps
You can configure these ports using the Giga762SX WLAN dsl. The PABX of the Giga762SX WLAN dsl allows you to connect wireless SIP phones (WLAN handsets) and PCs with SIP clients (software for Internet telephony) as extensions. You can use all functions of your PABX for Internet telephony also. - Page 14 WPS provides two possibilities for registration: Via registration button The access point (e.g. the Giga762SX WLAN dsl) has a registration button. The reg- istration button is available either: – as hardware: a specific button (labelled Scan) is provided on the device’s back panel.
-
Page 15: Features And Applications
WPS cannot be used together with WEP encryption or WPA/WPA2 authentication. Features and applications The Giga762SX WLAN dsl's wide range of features makes it ideal for a large number of applications. Depending on your device, some of the features may differ from the description in this instruction manual. - Page 16 The Giga762SX WLAN dsl server or printer. You can connect a USB hard disk or a printer to the USB interface of the Giga762SX WLAN dsl and make them available to all users in your network. The Giga762SX WLAN dsl supports...
- Page 17 – You can easily establish an FTP or an HTTP server for Internet access with the Giga762SX WLAN dsl. – You can connect a USB hub to the USB port on your Giga762SX WLAN dsl and thereby at the same time provide a printer and a storage medium for all clients in...
-
Page 18: First Steps
Internet service provider. For Internet telephony you also require – the access data for your VoIP service provider and – a phone for connecting to the Giga762SX WLAN dsl or a PC with a SIP client or a VoIP telephone. -
Page 19: Overview Of The Installation Steps
PC first so that it can establish a connection to the Giga762SX WLAN dsl. You can then use this PC to configure the device. To find out how to do this, refer to the section entitled "Configuring the local area network"... -
Page 20: Setting Up The Giga762Sx Wlan Dsl
VoIP provider's registration data (refer to the section entitled "Setting up In- ternet telephony (VoIP)" on page 98). 8. If you wish to use other functions of the Giga762SX WLAN dsl, for example the com- prehensive security features, use the Security Setup (page 50) or the Advanced Set- up (page 60). - Page 21 There is currently no fixed network connection. Connection to the Internet has been established. Online There is no Internet connection. A device is connected to the Giga762SX WLAN dsl via the On (green) USB port. The device connected on the USB port is using too much Flashing power (see page 163).
- Page 22 No phone is connected or the connection is idle. The Giga762SX WLAN dsl can be set up in any suitable location in the home or office. You do not need any special wiring. However, you should comply with the following...
-
Page 23: Connecting And Activating The Giga762Sx Wlan Dsl
First steps Connecting and activating the Giga762SX WLAN dsl Ports on the rear panel The rear panel of the Giga762SX WLAN dsl houses the ports. Element Description Socket for the mains adapter supplied Warning: Using the wrong power supply unit may damage the Giga762SX WLAN dsl. - Page 24 Phone1/2 Sockets for connecting two phones, fax or answering machine Reset button The underside of the Giga762SX WLAN dsl houses the reset button. Reset button Label with WPA key „SX762xxxxxx“ Reboot function: Press and hold the right end of the button for more than 1 second but less than 5 seconds to reboot the device.
-
Page 25: Connecting To The Splitter Data Port
First steps Connecting to the splitter data port You can operate the Giga762SX WLAN dsl in two different operating modes in order to set up an Internet connection: – with an integrated ADSL modem – with an external modem, such as a VDSL or cable modem Using the integrated ADSL modem ì... - Page 26 First steps Using an external modem ì Connect the LAN4/WAN port on the Giga762SX WLAN dsl with an external modem. To do this, use the cable supplied (black). ì Then connect this modem to the relevant communications port (e.g. splitter).
-
Page 27: Connecting To The Analogue Phone Port
First steps Connecting to the analogue phone port To make conventional calls via the fixed network, you must connect your Giga762SX WLAN dsl with the phone port of the splitter. ì Connect the Giga762SX WLAN dsl with the splitter as follows: –... -
Page 28: Connecting To The Phone
First steps Connecting to the phone ì Connect the Giga762SX WLAN dsl with the analogue phone as follows: – Insert the plug of the telephone into the Phone 1 or Phone 2 port on the Giga762SX WLAN dsl. Note: In the event of power failure you cannot make a VoIP call. In this case all outgoing calls... -
Page 29: Connecting Wired To The Pc
First steps Connecting wired to the PC You can connect wired or wireless PCs to your Giga762SX WLAN dsl to create a local area network (LAN). Wireless connection is possible after connecting the Giga762SX WLAN dsl to the power supply (see page 32). -
Page 30: Connecting To The Mains Power Supply
Connecting to the mains power supply Please remember: Only use the mains adapter supplied with the device (12V 1.5A DC). ì Connect the mains adapter cable to the PWR socket on the Giga762SX WLAN dsl. ì Plug the mains adapter into a mains socket. ì... -
Page 31: Connecting Wireless To The Pc
ì During the two-minute interval, activate WPS registration of the wireless network adapter on the PC. The client receives the security data for the Giga762SX WLAN dsl (SSID and pre-shared key) and is thereby registered. WLAN LED display during WPS registration: On (300 sec) WPS registration was successful. -
Page 32: Checking The Operating State
WLAN adapter Checking the operating state Your Giga762SX WLAN dsl is now ready for use. The LED displays on the front panel of the Giga762SX WLAN dsl provide information about the operating state (see page 22). When the device is ready for use, the LEDs light up as follows: The Power LED on the front lights up. -
Page 33: Network Configuration Of The Pcs
Making the basic settings You can now make the basic settings for Internet access using the user interface of the Giga762SX WLAN dsl (page 42). If you want to connect additional PCs to the Giga762SX WLAN dsl, please read the next section. -
Page 34: Connecting And Configuring Additional Pcs (Optional)
Once you have configured one PC as described above you can connect additional PCs to the Giga762SX WLAN dsl. You will need an additional cable for each PC you want to con- nect via cable. For the wireless connection of additional PCs, you will need a wireless network adapter. -
Page 35: The User Interface
The user interface The user interface You have connected a PC to the Giga762SX WLAN dsl and possibly made the settings in the local area network. You can now configure the Giga762SX WLAN dsl using this PC from the user interface of the Giga762SX WLAN dsl. We recommend for initial configu- ration that you connect the PC in wired mode. -
Page 36: The Start Screen
Internet connection (page 40). The start screen shows the status and also the button Connect or Disconnect. Open the Status menu to obtain status information about the Giga762SX WLAN dsl (page 130). - Page 37 You can configure your PABX for fixed network/Internet telephony, back up and restore the configuration data, set up the Giga762SX WLAN dsl as a virtual server for the network, configure a Web server, a file server or a print server and per- form other functions as required.
-
Page 38: Selecting A Language
To establish or end an Internet connection manually: ì Open the start screen of the Giga762SX WLAN dsl as described on page 37. If you have already started the user interface, click the start screen tab at the top left of the window. -
Page 39: Elements In The User Interface
Buttons in the Advanced Settings menu Transfers the settings you have made to the Giga762SX WLAN dsl configuration. Cancel Deletes all the entries on a screen since the last time you clicked OK. Other buttons may be displayed depending on the function in question. These are... -
Page 40: Basic Setup Wizard
Basic Setup Wizard Basic Setup Wizard The Basic Setup Wizard wizard guides you step by step through the general configura- tion of the Giga762SX WLAN dsl. This includes settings for your region and your Internet access. Connection to the Internet is established via the Giga762SX WLAN dsl for all PCs con- nected to it. -
Page 41: Regional Options
Basic Setup Wizard Regional Options You can select your present location for the regional settings on this screen. ì Select the country in which you are currently located from the list. You can set the time so that it automatically switches to summer time and/or another time zone of your choice. -
Page 42: Configuring Internet Connections
Basic Setup Wizard Configuring Internet connections You will find the access data you require for configuring the Internet connection in the documentation you received from your Internet service provider (ISP). You can perform the initial configuration of your Internet connection on this screen. If you want to change the data later on, you can do this in the Advanced Settings (page 61) menu. - Page 43 ì Specify how Internet sessions are to be established via Connection mode: – Select Always on if the connection is to exist at all times when the Giga762SX WLAN dsl is turned on. Notes: This option can result in high connection charges if you are on a time-based tariff.
- Page 44 Basic Setup Wizard PPPoE pass-through This option is only available if you have chosen another Protocol than PPPoE. PPPoE pass-through allows you to use an additional Internet connection (through another service provider) on one PC. Further information about this can be found on page 66. ì...
-
Page 45: Telephony
Basic Setup Wizard Telephony You will find the access data you require for configuring Internet telephony (VoIP) in the documentation you received from your service provider. ì Select the option On for VoIP account if you wish to use Internet telephony (default setting). -
Page 46: Wps Registration
Basic Setup Wizard ì Select Other from the Service provider selection menu (default setting) or, if required, use one of the suggested providers from the list. Enter the data you have received from your service provider: User name, Displayed name, Authorization user name, Password, SIP domain, SIP realm, Proxy server address and Registrar server address. - Page 47 Once WPS registration is activated, the device searches for a WPS client within range. Any WPS client within range that activates the WPS function during the two-minute interval receives the Giga762SX WLAN dsl security data (SSID and pre-shared key) and is thereby registered.
-
Page 48: Summary
Limit access to the wireless network to certain PCs (page 58). The user interface of the Giga762SX WLAN dsl guides you step by step through the secu- rity configuration. Once you have completed a screen, click Next >. If you want to make... - Page 49 Security Setup Wizard When using WPS please note the following: Your Giga762SX WLAN dsl is equipped with (Wi-Fi Protected Setup). You can use it to set the security of your wireless network easily with one click only (see page 15).
-
Page 50: Assigning A Password
Note: If you ever forget your password you will have to return the Giga762SX WLAN dsl to its factory settings (page 127). Please bear in mind that this will restore all settings to the factory configuration. The password will again be admin. -
Page 51: Ssid
SSID (Service Set Identifier). The default SSID for the Giga762SX WLAN dsl is shown at the label on the bottom of the device. For security reasons you can change this SSID and deactivate SSID broadcast. If this option is enabled, the Giga762SX WLAN dsl will send the SSID in all data transfers and the SSID of the Giga762SX WLAN dsl will be displayed on PCs that have a wireless network adapter. -
Page 52: Setting Up Security Functions For The Wireless Network
LAN. The Giga762SX WLAN dsl makes use of effective encryption methods to prevent unau- thorised eavesdropping as far as possible. The Giga762SX WLAN dsl is delivered with preset individual encryption (WPA2-PSK/ WPA-PSK with pre-shared Key). - Page 53 Security Setup Wizard WPA-PSK is a special WPA mode for private users and users in small companies without their own authentication server. After a certain period of time (Rekey interval), encryp- tion keys are automatically generated with the pre-shared key, automatically changed ("rekeying") and authenticated between the devices.
-
Page 54: Wep Encryption
You can choose either the standard 64-bit key or the more robust 128-bit key. The keys are generated in hexadecimal or in ASCII format. You must use the same keys for encryp- tion and decryption for the Giga762SX WLAN dsl and all your wireless network adapters. ì... - Page 55 You have to change the WEP encryption in the wireless network adapters for the connected PCs in the same way, otherwise they will not be given access to the Giga762SX WLAN dsl wireless network. ì To go to the next step, click Next >...
-
Page 56: Access Control Within The Wireless Network
Security Setup Wizard Access control within the wireless network In this step you can specify which PCs will have wireless access to the Giga762SX WLAN dsl and hence to the LAN. Access control is based on the MAC address of the PC network adapters. -
Page 57: Saving Settings
If you activate MAC access control, you must at least add the PC on which you are con- figuring the Giga762SX WLAN dsl to the list. Otherwise, you will have no access to the user interface and will receive an appropriate error message. -
Page 58: Configuring Advanced Settings
If you have changes the encyption setting, you must now configure the WEP or WPA key for the wireless network adapter of the PC that has been configured with other values. After this you can again wirelessly log on to the Giga762SX WLAN dsl. Configuring Advanced Settings In the Advanced Settings menu, you can configure all the options for the Giga762SX WLAN dsl. -
Page 59: Internet
Configuring Advanced Settings Internet If you have configured the Giga762SX WLAN dsl using the two wizards, you have also configured the connection (Internet access). You can check or change these set- tings in the Internet menu. This menu also offers you a wide range of possibilities for setting up security settings and limiting access to the Internet as well as for providing your own services on the Internet. -
Page 60: Internet Selection
ì Choose the desired Connection type for your Internet connection: – Choose the ADSL if you are using the integrated ADSL modem of the Giga762SX WLAN dsl. – Choose Ethernet if you are setting up the connection to the Internet via an Eth- ernet network connection (e.g. - Page 61 Configuring Advanced Settings ì For an ADSL connection, make the following settings: – Enter the values for VPI / VCI for each connection service that you have received from your Internet service provider. – Enter a description to identify the respective connection service. –...
-
Page 62: Internet Connection
Configuring Advanced Settings Internet Connection You can set up or change the configuration of your Internet connection on this screen. All the settings you make here must coincide with the features your Internet service pro- vider makes available to you. False information can lead to problems with your Internet connection. - Page 63 ì Specify how Internet sessions are to be established via Connection mode: – Select Always on if the connection is to exist at all times when the Giga762SX WLAN dsl is turned on. Notes: You must set up the Always on option if you wish to use Internet telephony.
- Page 64 76), thereby facilitating communication via the Internet. The task bar on the PC on which UPnP is installed contains an icon for the Giga762SX WLAN dsl. Click this icon to open the user interface. On Windows XP system, this icon is also shown under network connections.
-
Page 65: Dns Server
Configuring Advanced Settings ì Click OK to apply the settings. DNS server DNS is a decentralised service that assigns PC names or Internet addresses (Domain names) and IP addresses to one another. A DNS server has to administer this information for each server or each LAN with an Internet connection. -
Page 66: Mac Address
If you already had Internet access through the same Internet service provider before connecting the Giga762SX WLAN dsl, it is possible that the MAC address of one of your PCs was used for registration when the connection was being set up. In this case, you... -
Page 67: Firewall
Protect the network against hacker attacks (for information see below), Block access by individual PCs to selected services (page 71). The firewall functions for the Giga762SX WLAN dsl are activated and configured in the factory. If you want to deactivate the firewall, carry out the following steps: ì... -
Page 68: Attack Detection
Configuring Advanced Settings Attack Detection If the firewall functions of the Giga762SX WLAN dsl are activated, the device monitors and limits access to incoming data traffic via the DSL connection with a function called "Stateful Packet Inspection" (SPI). This allows the Giga762SX WLAN dsl to detect and pre- vent certain types of attack from the Internet, such as Denial-of-Service (DoS). -
Page 69: Setting Up Access Control To The Internet
Configuring Advanced Settings Setting up access control to the Internet The Access Control function allows you to block access to various services for one or more PCs. You can permit or block access to services at certain times. ì In the Advanced Settings menu, select: Internet – Firewall – Access Control ì... - Page 70 Configuring Advanced Settings ì Select the Access rule type from the list: – Apply to all clients: The rule applies to all PCs in the network. – Specify IP address or Specify MAC address: The rule applies to a PC you have selected via the IP address or MAC address.
-
Page 71: Setting Up The Nat Function
Port triggering is a special variant of port forwarding. Unlike port forwarding, the Giga762SX WLAN dsl forwards the data from the port block to the PC which has previ- ously sent data to the Internet via a certain port (trigger port). This means that approval for the data transfer is not tied to one specific PC in the network, rather to the port num- bers of the required Internet service. - Page 72 IP addresses of PCs in the local network are converted to the router's public IP address when accessing the Internet. You can use the NAT settings to configure the Giga762SX WLAN dsl to carry out the fol- lowing tasks:...
-
Page 73: Port Triggering
Configuring Advanced Settings ì Select the required option. Port Triggering If you configure port triggering for a certain application, you must identify a trigger port and the protocol (TCP or UDP) this port uses. You can then assign the public ports that must be opened for the application and this trigger port. -
Page 74: Port Forwarding
Apply the settings by clicking OK. Port Forwarding If you configure Port Forwarding, the Giga762SX WLAN dsl outwardly assumes the role of the server. It receives requests from remote users under its public IP address and auto- matically redirects them to local PCs. The private IP addresses of the servers on the local... - Page 75 Configuring Advanced Settings Internet services are addressed via defined port numbers. The Giga762SX WLAN dsl needs a mapping table of the port numbers to redirect the service requests to the serv- ers that actually provide the service. Port Forwarding has been configured for this purpose.
-
Page 76: Opening The Firewall For A Selected Pc (Exposed Host)
Configuring Advanced Settings You can use – a single port number, – several port numbers separated by commas, – port blocks consisting of two port numbers separated by a dash, or – any combination of these (for example 80,90-140,180). ì In the Local port field, enter the internal port number to which service requests are to be forwarded. -
Page 77: Dynamic Dns
In this case you must ensure that the assignment of the IP address to the domain name is updated regularly. This task is performed by the dynamic DNS service (DynDNS). You can use the DynDNS service to assign the Giga762SX WLAN dsl an individual fixed domain name on the Internet even if it does not have a static IP address. - Page 78 Configuring Advanced Settings One possible service is DynDNS.org (http://www.DynDNS.org). If you have activated the device's DynDNS function, it will monitor its public IP address. When this changes, the device will open a connection to DynDNS.org and update its IP address there. Note: You must have an account with the service you have chosen (e.g.
-
Page 79: Routing
Configuring Advanced Settings Routing Your Internet service provider can permit you to set up a number of connection services. The entire data traffic between your local network and the Internet uses the first con- nection service (route) by default. After setting up various connection services (page 62), you can change this default route and set up additional routes by assigning data traffic to other connection services. -
Page 80: Lan Configuration
Giga762SX WLAN dsl is 255.255.255.0. ì If you want to assign a different IP address to the Giga762SX WLAN dsl, enter your chosen IP address in the boxes next to IP address. Please make sure to note which subnet mask is set when assigning the IP address. - Page 81 IP address. ì If you want to define a different Default gateway in your local area network instead of the Giga762SX WLAN dsl, enter the IP address of this default gateways in the rel- evant boxes. Entering the DNS server...
-
Page 82: Assigning Static Ip Addresses To Individual Pcs
Configuring Advanced Settings Your Internet service provider will usually provide you with a DNS server that makes this assignment when an Internet connection is set up. If necessary, you can manually define the DNS server to be used for the Internet connections. ì... -
Page 83: Configuring Wireless Connections
In the Advanced Settings menu, select: Wireless Network ì Select On for the Wireless Network (default setting). Devices can only log in wirelessly if the WLAN module of the Giga762SX WLAN dsl is activated. You can now make the settings for the wireless network. - Page 84 SSID (Service Set Identifier). The default SSID for the Giga762SX WLAN dsl is shown at the label on the bottom of the device. For security reasons you can change this SSID and deactivate SSID broadcast (for information see below).
-
Page 85: Starting Wps Registration And Configuring Wps
The most simple method to establish a secure wireless connection is press the registra- tion (Scan) button or click once in the user interface of the Giga762SX WLAN dsl and do the same with the client. For further information, see "WPS" on page 15. -
Page 86: Setting Encryption
WDS repeater function. If you change the preset key after having registered PCs at the Giga762SX WLAN dsl via WPS or manually, you must register all PCs again manually or via WPS. -
Page 87: Wpa2-Psk And Wpa2-Psk / Wpa-Psk
WPA2 and WPA2/WPA with authentication server (page 90) WEP encryption (Wired Equivalent Privacy, see page 92) Note: If you want to use the repeater function of your Giga762SX WLAN dsl (page 96) you can only use WEP encryption. WPA2-PSK and WPA2-PSK / WPA-PSK Note: This screen allows you to display the pre-shared key. - Page 88 Configuring Advanced Settings WPA with a pre-shared key (WPA-PSK) WPA-PSK is a special WPA mode for private users and users in small companies without their own authentication server. After a certain period of time (Rekey interval), encryp- tion keys are automatically generated with the pre-shared key, automatically changed ("rekeying") and authenticated between the devices.
- Page 89 Configuring Advanced Settings ì Select the required option in the Security field. ì Enter the IP address of the RADIUS server in the RADIUS server IP address field. ì Enter the port of the RADIUS server in the RADIUS server port field. ì...
-
Page 90: Wep Encryption
You can choose either the standard 64-bit key or the more robust 128-bit key. The keys are generated in hexadecimal or in ASCII format. You must use the same keys for encryp- tion and decryption for the Giga762SX WLAN dsl and all your wireless network adapters. ì... - Page 91 When you have concluded the configuration, you must change the WEP encryp- tion in the wireless network adapters for the connected PCs in the same way as they will not otherwise be given access to the wireless network of the Giga762SX WLAN dsl.
- Page 92 Configuring Advanced Settings Generating a key by means of a Passphrase ì Enter a Passphrase (up to 32 characters) and confirm it by entering it again. The key is generated automatically. ì Click OK to apply the settings.
-
Page 93: Permitted Clients
On this screen you can specify the PCs that are to have wireless access to the Giga762SX WLAN dsl and hence to your LAN and WLAN. The default setting for access control is deactivated. This means that all PCs that use... -
Page 94: Repeater Function (Wds)
If you activate MAC access control, you must at least add the PC on which you are con- figuring the Giga762SX WLAN dsl to the list. Otherwise, you will have no access to the user interface and will receive an appropriate error message. - Page 95 Configuring Advanced Settings All repeaters/access points in range are displayed with the following information: – SSID – MAC address – Channel – Type (11b or 11g) The Signal strength of the connection to the repeater, if one exists, is shown as a per- centage.
-
Page 96: Setting Up Internet Telephony (Voip)
Further information can be found in the user manual for the repeater. Setting up Internet telephony (VoIP) The Giga762SX WLAN dsl allows you to make telephone calls via the Internet using an analogue telephone and also via the fixed network as usual. For Internet telephony (VoIP), you require access authorisation from your service provider and the relevant access data. -
Page 97: Voip Settings
Configuring Advanced Settings VoIP settings You will receive the access and configuration data for Internet telephony from your serv- ice provider. ì In the Advanced Settings menu, select: Telephony – VoIP ì Select On if you wish to use Internet telephony (default setting). ì... - Page 98 Configuring Advanced Settings – Fixed gain control (input/output): To adjust the volume for call input (hear) or output (speak), simply enter a different value. The value range is -24 to +24. The higher the value, the higher the volume. qiet normal loud The real value range which can be used depends on your device.
- Page 99 Configuring Advanced Settings ì To set up a new account, select On. ì In the Service provider menu, select the Other option or otherwise select one of the preconfigured providers. ì Enter the data you have received from your service provider: If you choose a preconfigured service provider, the only options are generally User name and Password.
-
Page 100: Extensions
VoIP. Two of these extensions are connected to your Giga762SX WLAN dsl via the Phone 1 and Phone 2 ports, while the remaining extensions are connections for SIP clients. You can assign each extension the relevant line (fixed network or VoIP account) for incoming and outgoing calls and make other settings for each extension (e.g. - Page 101 ì In the Advanced Settings menu, select: Telephony – Extensions Phone connectors The two telephone ports Phone 1 and Phone 2 of the Giga762SX WLAN dsl have the internal phone number *A1 or *A2. ì Click Edit to adapt the settings for an entry (page 104).
- Page 102 Configuring Advanced Settings Configuring extensions The Extension shows either the selected port of the Giga762SX WLAN dsl (Phone 1 or Phone 2) or the SIP client. The Extension number for the extension is preset and is dis- played as a call number.
- Page 103 Configuring Advanced Settings ì Select the Call pickup option to have the option to accept all incoming calls on this extension. ì Select Hide own number for outgoing calls (CLIR) if you want to prevent the number of this extension being displayed for outgoing calls. (Only for Phone 1 and Phone 2 ports).
-
Page 104: Dialing Plans
Wait for dial tone on fixed line Only activate this function if it is necessary for the smooth functioning of your Giga762SX WLAN dsl within the telephone network. ì If you wish to make all fixed network calls via a call-by-call provider, activate the... -
Page 105: Quick Dial
Configuring Advanced Settings ì Enter the provider's number in the Preselection number field. ì Choose whether you want to use dialling plans. ì In the Phone number field, enter an individual number or also the first digits of phone numbers (e. g. 0800 or a specific area code) for which the dialling plan is to apply. -
Page 106: Usb
More empty lines will then be added. ì Click OK to confirm the settings. The USB port of your Giga762SX WLAN dsl can be used to set up a File Server to share a USB mass storage device (page 110) - Page 107 Configuring Advanced Settings Notes: If you connect a USB hub to the USB port of the Giga762SX WLAN dsl, you can con- nect and use a USB memory and a USB printer at the same time. If connecting a device without its own power supply directly to the USB port, please note that the power consumption must not exceed 500 mA.
-
Page 108: File Server
USB mass storage device (for example a USB flash drive or external USB drive) and make them available to all users in the local network and on the Internet. Connect a USB data carrier to the Giga762SX WLAN dsl via the USB port. ì... - Page 109 Configuring Advanced Settings ì Enter a User name, a Password, and confirm it in the next line. ì Click OK. The File Server start page is shown again. ì Click Add to define Shared Folders for the Users defined above. ì...
-
Page 110: Web Server
Configuring Advanced Settings ì Choose the Access Rights for each user: no access, read-write access, or read- only access. ì Click OK. The File Server start page is shown again. ì You can edit or delete a user by clicking the Edit or Delete button. ì... - Page 111 ì In the Advanced Settings menu, select: USB – Web Server The IP address (see page 82) of the Giga762SX WLAN dsl is displayed, as well as infor- mation as to whether Dynamic DNS (see page 79) is activated. HTTP HTTP (Hypertext Transfer Protocol) is the standard protocol for trans- ferring data on the Internet.
- Page 112 PCs in the network access the USB mass storage device via FTP. To do this, open the Internet browser and enter the following address: ftp://10.0.0.2 If you have changed the IP address of the Giga762SX WLAN dsl (see page 82), enter the new address instead of 10.0.0.2. ì...
-
Page 113: Print Server
Configuring Advanced Settings ì Enter the name in the Specified user field. Define different user names for the dif- ferent access type and directory. ì Enter the password for the user and confirm it by entering it again in the field below. The password is case-sensitive. - Page 114 Giga762SX WLAN dsl shown here when configuring the printer. ì Click OK to accept the changes. You will find information on setting up the printer connected to the Giga762SX WLAN dsl in the section entitled "Using the USB port" on page 137.
-
Page 115: Call Guide
Call guide Call guide Your Giga762SX WLAN dsl allows you to make calls via the Internet (VoIP) and your fixed line. A description of how to configure your Giga762SX WLAN dsl for using the tele- phone functions is provided under "Telephony" on page 47 and "Setting up Internet telephony (VoIP)"... -
Page 116: Toggling Telephone Calls
Call guide Toggling telephone calls Key combination Effect Description Press R to initiate a consultation with another phone number during a call. Consultation Dial the desired (internal or external) Phone number number for the consultation. Press R2 to accept an incoming call during a call. - Page 117 Call guide Key combination Effect Description If you press R4 during a conference call, you end your call and set up a End conference call connection between the other two and set up the con- external call parties. You can then nection between call replace the receiver.
-
Page 118: Administration
Administration Administration The Giga762SX WLAN dsl user interface includes several helpful functions for adminis- tration. Regional Options Enables regional settings (page 121) System Password Changes the system password (page 122) System Management Configures system management (page 124) Save & Restore... -
Page 119: Regional Options
Administration Regional Options For operating your Giga762SX WLAN dsl, you can select the location, time zone and for- mat for entering the time and date, and you can also configure a time server for the Internet time (system time). ì... -
Page 120: Internet Time
Click OK to apply the settings. System Password You can assign a System Password to the Giga762SX WLAN dsl user interface and spec- ify the period after which a session is to be automatically ended if no further entry is made. - Page 121 Avoid proper names and all too obvious words. Use a combination of letters, digits and special characters. Note If you forget your System Password, you have to reset the Giga762SX WLAN dsl . This returns all your settings to the factory configuration. This means the system password is changed back to admin.
-
Page 122: System Management
In the Advanced Settings menu, select: Administration – System Management Remote Management enables a PC that is not in your local network to be used to con- figure the Giga762SX WLAN dsl via a standard Web browser. You can activate Remote Management for one particular or for any PC. - Page 123 Internet always has the same IP address. For access to the configuration environment via Remote Management, you must enter the address of the Giga762SX WLAN dsl to be managed in the browser using the following format: http://X.X.X.X:8080 (x.x.x.x represents the IP address of the Giga762SX WLAN dsl).
-
Page 124: Backing Up And Restoring A Configuration
Administration Backing up and restoring a configuration When the Giga762SX WLAN dsl has been configured, it is recommended that you back up the settings. This means you can restore the settings at any time if they are acciden- tally deleted or overwritten. -
Page 125: Restoring Factory Settings
Click OK. The configuration will now be updated. Restoring factory settings You can reset the Giga762SX WLAN dsl to the factory settings. You should do this before making the device available to others or exchanging it through the dealer. Otherwise unauthorised persons may use the Internet access data at your expense. -
Page 126: System Log
Administration System Log The System Log is displayed in the Status – Device menu. It contains important infor- mation about how the device functions and possible problems. This information can also be automatically transferred to a system log server. ì In the Advanced Settings menu, select: Administration –... - Page 127 Administration ì System log server – Activate this function if the device system log is to be automatically transferred to a system log server in the local network. – Server address type Choose if you want to enter the server address as IP address or domain name. –...
-
Page 128: Status Information
Information about configuration and the status of the Giga762SX WLAN dsl is displayed in the Status menu of the Giga762SX WLAN dsl. On the first screen you will find an overview of the status of the Internet connection, the local and wireless network, the telephony, the USB interface and the device. -
Page 129: Security
Status information Registration Button Shows if the registration button (Scan button) on the device’s back panel is enabled or disabled. Telephony VoIP accounts Shows the number of VoIP accounts and the connection status. Status Status of the USB connection of the device. It can be enabled (On) or disabled (Off). Additionally, the occurrence of the following problems is displayed: USB device not supported or not recognized. -
Page 130: Internet
Status information rity risk is given in the section "Starting WPS registration and configuring WPS" on page 87. Access to your wireless network not restricted to allowed clients Users can access the wireless network from any PC. Information on how to avoid this security risk is given in the section "Permitted clients"... - Page 131 Status information Shows the public MAC address of the device. Default gateway Shows the IP address of the assigned default gateway. Preferred DNS server Shows the IP address of the assigned DNS server. Alternate DNS server Shows the IP address of the alternate DNS server, if available. Downstream rate Shows the current transmission rate for incoming traffic.
-
Page 132: Local Network
Status information Local Network You will find information about the local network settings on the Local Network screen in the Status menu. In the Status menu, select Local Network: IP address Shows the local IP address of the device. Subnet mask Shows the subnet mask used in the local network. -
Page 133: Telephony
Status information Wireless clients Shows all clients in the wireless network that are currently connected to the device. The Host name, MAC address and IP address are specified for identifying each cli- ent. You will also see information about the Uptime to date of the current connec- tion for each client in the wireless network. -
Page 134: Device
Status information Device You will find the most important device data on the Device screen in the Status menu. In the Status menu, select Device: System uptime Show's your device's operating time since the last time the system was started. System time Shows the system time for your device. -
Page 135: Using The Usb Port
The print job you send to the PC to which the printer is connected reduces the per- formance (resources) of this PC. If you use the USB port on the Giga762SX WLAN dsl for your printer, you have all the advantages of a network printer without the disadvantages referred to above: The network, and consequently also the printer, is always ready (the Giga762SX WLAN dsl and the printer itself must be switched on, of course). -
Page 136: Installing A Standard Tcp/Ip Printer Port Under Windows Vista
You can use the standard TCP/IP port driver available with this operating system. Make sure that the Giga762SX WLAN dsl is connected and is available in the network. A printer does not have to be connected to the USB port on your Giga762SX WLAN dsl at this point. - Page 137 Using the USB port ì In the Add Printer Wizard, click the option Add a local printer. ì Select the Create a new port option button. ì Then select Standard TCP/IP Port from the selection menu in the field Type of Port. ì...
- Page 138 ì In the Host Name or IP Address input field, enter the IP address of the printer server (Giga762SX WLAN dsl): e.g. 192.168.2.1. This entry is transferred into the Port Name field. This name will later appear in the list of printer ports.
- Page 139 Using the USB port ì Select the Custom option and click on Settings. ì Select the LPR option box. ì For Queue name enter lp0 (lower case: lima, papa, number 0). ì LPR Byte Counting Enabled should not be selected. ì...
- Page 140 Using the USB port Windows is searching for the appropriate driver model. ì Choose the appropriate driver for your printer and click on Next. After successfully installing the driver you can now define a name for your printer. This is the name which is used to display the printer in the printer list. ì...
- Page 141 Click Finish. Note: The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does not evaluate any of the printer's response messages. For this reason please make sure that your printer is also only configured uni-directionally. You can configure the rele-...
-
Page 142: Installing A Standard Tcp/Ip Printer Port Under Windows Xp/2000
Giga762SX WLAN dsl is connected and can be reached in the network. A printer need not be connected to the USB port on your Giga762SX WLAN dsl at this point. The following illustrations show installation on Windows XP. Installation on Windows 2000 is essentially the same. - Page 143 Using the USB port ì In the Add Printer Wizard, click Next. The printer port you are installing will behave like an additional parallel port on the PC. For this reason you must click the option button next to Local printer in this window. The Automatically detect and install my Plug and Play printer check box must not be selected.
- Page 144 Using the USB port ì Click the Create a new port option button. ì Then select Standard TCP/IP Port from the selection menu in the field next to this option. ì Click Next. ì In the wizard for setting up a standard TCPI/IP port, click Next.
- Page 145 Using the USB port ì In the Printer Name or IP Address input field, enter the IP address of the print server (Giga762SX WLAN dsl): e.g. 192.168.2.1. A copy of your entry is displayed in the second field. ì Double-click in the Port Name field and enter a name. This name will appear in the list of printer ports.
- Page 146 Using the USB port ì Enter the following data in the relevant fields: – Printer name or IP address: Enter the IP address of the print server. – Protocol Choose the option LPR. – Queue name: lp0 (lower case: lima, papa, number 0) –...
- Page 147 Using the USB port ì Click Finish. Once the wizard for installing the printer port is finished, the Add Printer Wizard is opened. ì If you wish to install a printer for this port immediately, click Next and follow the instructions of the Add Printer Wizard.
-
Page 148: Installing A Printer On The Tcp/Ip Port Retrospectively
If you do not wish to install a printer until later, click Cancel. Note: The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does not evaluate any of the printer's response messages. For this reason please make sure that your printer is also only configured uni-directionally. -
Page 149: Instructions For Setting Up A Printer On The Pc
Then continue to install the printer and finish the installation. Note: The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does not evaluate any of the printer's response messages. For this reason please make sure that your printer is also only configured uni-directionally. -
Page 150: Using The Data On A Usb Mass Storage Device
Using the data on a USB mass storage device To view directories and files which are shared via the Giga762SX WLAN dsl file server on the USB port within the Windows network, some parameters on your PC must be set cor- rectly. - Page 151 Using the USB port The check boxes next to the entries Internet Protocol Version 4 (TCP/IPv4) File and Printer Sharing for Microsoft Networks must be marked. ì If one of these components is not installed it will have to be installed subsequently. You may need your Windows installation CD.
-
Page 152: Share Inter Process Communication For The Network
To be able to share data on the USB mass storage device on the Giga762SX WLAN dsl, the IPC must be set to access resources shared in the network (network share). -
Page 153: Enabling File And Printer Sharing In The Windows Firewall
Using the USB port ì Click on Start. If an error message appears with a content like "..has been started and then stopped again..", you still have to allow file and printer sharing in the Windows firewall (see next section). Enabling file and printer sharing in the Windows firewall The Windows firewall must be set to allow file and printer sharing. - Page 154 Using the USB port The File and Printer Sharing entry must be marked. Now your Windows system should be able to access the shared data on the Giga762SX WLAN dsl.
-
Page 155: Appendix
If the mains adapter is not working properly, contact our customer serv- ice unit (see Quick Start Guide). ì If your Giga762SX WLAN dsl has an On button at the rear: Check whether the device is plugged in. ì ADSL LED flashes Wait until the integrated DSL modem has com- pleted its synchronisation. - Page 156 The connection may have been terminated manu- ally with the Connect on demand option selected. – Restore the connection again manually using the Connect button or – Restart the Giga762SX WLAN dsl. In both cases, the Connect on demand setting will be active again. ì...
- Page 157 You defined a PIN for WPS registration at the net- work adapter but you didn’t enter this PIN at the Giga762SX WLAN dsl PIN or not the right one. ì Find out the PIN that is used by the network adapter.
- Page 158 If you do not know the key, repeat key entry (page 87) via a PC connected via cable to the Giga762SX WLAN dsl and enter the new key on the network adapter. Otherwise, you can use the WPS function.
- Page 159 PCs in the LAN. This means that the masked part of the IP address on each PC and on the Giga762SX WLAN dsl has to be identical. Check whether Ethernet is specified as the Internet connection type if the PC is connected to the LAN4/ WAN port (page 62).
- Page 160 Appendix Symptom Possible cause and solutions ì You cannot conduct VoIP tel- The phone or the Giga762SX WLAN dsl is not con- ephone calls. nected properly to the DSL port. Check the cabling and the ports. ì The access data for your VoIP phones is not entered correctly.
-
Page 161: Deactivating Http Proxy And Configuring A Pop-Up Blocker
The ports are destroyed externally if there is a power surge. Deactivating HTTP proxy and configuring a pop-up blocker Before you can start the configuration program of the Giga762SX WLAN dsl, you might need to adjust the settings described below for your Web browser. -
Page 162: Configuring The Pop-Up Blocker
ì Confirm the dialogue window by clicking OK. The configuration screens for the Giga762SX WLAN dsl are now allowed as pop-ups. You can make additional settings for pop-ups within Internet Explorer via the Tools – Popup Manager menu item or via Tools – Internet Options on the Privacy tab. -
Page 163: Specifications
Appendix Specifications Interfaces 1 DSL RJ11, RJ-45 4 LAN RJ45, 10Base-T/100Base-TX, Auto-sensing 1 USB USB 2.0, for printer server or file server (max. 500 mA) 1 FXO RJ45, for connecting to the analogue telephone network 2 FXS RJ11, for connecting analogue terminals (phone, fax, answering machine) WLAN 802.11g, for wireless connection of up to 252 PCs... -
Page 164: Authorisation
Not all of the functions described in these instructions are available in all countries. Country-specific requirements have been taken into consideration. We, Siemens Home and Office Communication Devices GmbH & Co. KG, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/EC. -
Page 165: Open Source Software Used In The Product
Open Source Software files are protected by copyright. Your rights to use the Open Source Software beyond the mere execution of the program of Siemens Home & Office Communication Devices GmbH & Co. KG are governed by the relevant Open Source Software license conditions. -
Page 166: Glossary
Glossary Access point An access point, such as the Giga762SX WLAN dsl, is the centre of a wireless local net- work (WLAN). It handles the connection of the wireless linked network components and regulates the data traffic in the wireless network. The access point also serves as an... - Page 167 The Giga762SX WLAN dsl includes a DHCP server and uses it to assign automatic IP addresses to PCs in the local network. You can specify that the IP addresses for certain PCs are never changed.
- Page 168 Glossary Domain Name System DNS permits the assignment of IP addresses to computers or Domain names that are easier to remember. A DNS server must administer this information for each with Internet connection. As soon as a page on the Internet is called up, the browser obtains the corresponding IP address from the DNS server so that it can establish the connection.
- Page 169 IP address. Encryption Encryption protects confidential information against unauthorised access. With an encryption system, data packets can be sent securely over a network. The Giga762SX WLAN dsl offers encryption and for secure data transfer over wireless net- works.
- Page 170 Glossary Gateway A gateway is a device for connecting networks with completely different architectures (addressing, protocols, application interfaces etc.). Although it is not totally correct, the term is also used as a synonym for Router. Global IP address Public IP address Half duplex Operating mode for data transmission.
- Page 171 Dynamic IP address). On the Internet Domain names are normally used instead of the IP addresses. The is used to assign domain names to IP addresses. The Giga762SX WLAN dsl has a Private IP address and a Public IP address. IPoA...
- Page 172 (a site). As a rule the users and operators are identical. A local network can be connected to other local networks or to a wide-area network (WAN) such as the Internet. With the Giga762SX WLAN dsl you can set up a wired local Ethernet...
- Page 173 (also known as the global IP address) is a network component's address on the Internet. It is assigned by the Internet service provider. Devices that cre- ate a link from a LAN to the Internet, such as the Giga762SX WLAN dsl, have a public and a Private IP address.
- Page 174 (also known as the local IP address) is a network component's address within the local network (LAN). The network operator can assign any address he or she wants. Devices that act as a link from a local network, such as the Giga762SX WLAN dsl, have a private and a Public IP address.
- Page 175 Glossary Rekey interval The rekey interval is the period after which new keys are automatically generated for data encryption with WPA-PSK. Remote management Remote management refers to the ability to manage a network from a network compo- nent that is actually outside the local network (LAN). Repeater A repeater extends the range of a wireless local network by relaying data from the Access point...
- Page 176 If the subnet mask is in a network that is administered by the Giga762SX WLAN dsl, for example 255.255.255.0, that means the first three parts of the IP address form the net- work number and only the final part can be used for assigning host numbers.
- Page 177 Glossary Switch A switch, like a Hub, is an element used to link different network segments or compo- nents. Unlike a hub however, the switch has its own intelligence that enables it to for- ward packets to only the subnet or network component they are meant for. See also: Bridge, Hub, Router, Gateway Transmission Control Protocol...
- Page 178 Internet that runs not on itself, but on another network component. The Giga762SX WLAN dsl can be configured as a virtual server. It will then direct incoming calls for a service via Port forwarding directly to the appropri- Port of the network component in question.
- Page 179 WLAN is currently specified in Standard IEEE 802.11. The Giga762SX WLAN dsl complies with Standard 802.11g. WPA is a new standard-conformant solution for greater security in wireless networks. WPA is meant to replace the existing WEP standard (Wired Equivalent Privacy) and offers more reliable encryption and authentication methods.
-
Page 180: Index
Index Index Numerics ..... . . Bridge ....Broadcast . - Page 181 ..... Gateway Giga762SX ....
- Page 182 Maximum Receive Unit see MRU ....Giga762SX Maximum Transmission Unit see MTU .....
- Page 183 Index ....... . wireless Printer on the USB port . . . Network Address Translation Printer port (TCP/IP), installing .
- Page 184 Index ....changing ... . . System requirements ....Scan button .
- Page 185 Index User interface Wi-Fi Protected Setup see WPS ........buttons Windows firewall .