Table of Contents
Advertisement
Optical Parts Location and Direction
Optical filter(UV cut)
Integrator lens (In)
Slot part comes this
top side.
Rugged surface
side
Integrator lens should be
placed as rugged surface side
comes to the Holder side.
Fig.35
PBS and Integrator lens (OUT)
Printed marker comes
this position.
(The lower side of back)
Film attached side comes to
this side.
Chamfer part
comes this position.
Fig.33
Polarized glass, Optical filter
Film attached
LCD Panel
side.
Polarized glasses and Optical fil-
ters(WV) should be placed as the
film attached side comes to the
LCD panel side.
Fig.36
Fig.39
Slot part comes this top
side.
Integrator lens should be
placed as rugged surface side
comes to the Holder side.
- 52 -
Relay lens(OUT)
Fig.34
Spherical surface side
The marker comes this sur-
face side
(Non Spherical surface side)
Mirror and Optical filter
Fig.37
A
Printed marker comes this
surface side.
Dichroic mirror
Fig.38
B
Printed marker comes always to
the position of the figure.
Condenser Lens(OUT)
B
Flat surface
Plane surface comes
Condenser lens(out)
Fig.40
this side.
Condenser Lens(IN)
The arrow mark points at the
LCD panel.
Fig.41
LCD
panel
Advertisement
Table of Contents
