Table of Contents
Advertisement
10
-3 Fan(FN915), Ducts, and Temperature switches removal.
1. Remove 2 screws-A and remove the Fan(FN915).
2. Remove 2 screws-B and remove the Duct PBS.
3. Remove 4 screws-D and remove the temperature switches (SW903,SW904,SW905,SW906).
(See Fig.10-3)
Note;
Mark the temperature switches as they are
removed from the optical base so that they
may be reassembled in the same location
from which they were removed.
10
-4 Holders removal.
1. Remove 2 screws-A, remove 3 screws-b and remove the Holder-A.
2. Remove 3 screws-C and remove the Holder-B.
(See Fig.10-4)
Temperature switch
SW906
Temperature switch
SW905
D
D
FN915
A
Holder-A
- 39 -
Mechanical disassemblies
Temperature switch
SW904
D
Temperature switch
SW903
D
Duct PBS
B
B
A
A
A
B
B
Holder-B
C
C
C
Fig. 10-3
B
Fig. 10-4
Advertisement
Table of Contents
