Mechanical disassemblies
4
-8 Control Switch unit disassemblies.
1. Remove 4 screws, remove the Control Button and remove the Control Board.
(See Fig.4-8)
5
-1 Shield plates removal.
1. Remove screws-A, and remove the grounding lead.
2. Remove 2 screws-B, remove 2 screws-C and remove the shield plate.
( Do not remove the Lens shift unit screw. Otherwise the Lens shift mechanism is damaged.
Warning:
Do not remove the screw.
Control Board
Fig.4-8
Grounding Lead
A
Fig.5-1a
- 24 -
Control Button
Control Panel
B
B
C C
Shield plate
Fig.5-1