1
-5 Speaker boxes and Front LED Board removal.
1. Remove 4 screws-A and remove the Speaker box-A.
2. Remove 4 screws-B and remove the Speaker box-B.
3. Remove 2 screws-C and remove the Front LED Board.
(See Fig.1-5)
1
-6 Decoration Inlays and R/C-1 Board removal.
1. Remove screw-A and remove the R/C-1 Board.
2. Remove 2 screws-B and remove the DEC Inlay R/C-F.
3. Remove 2 screws-C and remove the DEC Inlay-A.
(See Fig.1-6)
1
-7 Speaker Grills and Nets removal.
1. The bent portion is stretched and remove the Grille SP-L,
remove the Grille SP-R from cabinet front.
2. Remove the Nets.
(See Fig.1-7)
Mark the Grills as they are removed from the Cabinet front so that
they may be reassembled in the same location from which they
were removed. Be careful of the attached direction of Grills.
Speaker unit-A
Cabinet front
R/C 1 Board
DEC Inlay R/C-F
Net
Grill SP-L
Fig.1-7
- 17 -
Mechanical disassemblies
A
Front LED Board
A
C
C
A
A
B
B
B
B
Speaker unit-B
Fig.1-5
A
B
B
C
C
DEC Inlay A
Cabinet front
Fig.1-6
Grill SP-R
Net