Table of Contents
Advertisement
13
-5
Polarizer units removal.
1. Remove 6 screws-A and remove the Polarized glass units. (See Fig.13-5)
Red and Green Polarized Units
2. Remove screw-B, remove 3screws-E, 3 Spacers-F
and remove the Optical filter unit forward.
3. Remove screw-C, remove the Plate(A) and remove
the Optical filter.
4. Remove 2 screws-D, remove the plates(C) and
remove the Polarized glass(IN).
(See Fig.13-5a)
Optical
filter Holder
E
Plate (A)
C
A
A
A
Green
Red
Polarized
glass (IN)
Plate (B)
D
F
D
E
B
F
F
E
Fig.13-5a
Optical
filter(WV)
Temperature sensor
A
(PTH901)
A
A
Blue
Blue Polarized unit
5. Remove 2 screws-G, remove the plates(D) and
remove the Polarized glass (IN).
6. Remove screw-H, and remove the Temperature
sensor (PTH901) unit.
(See Fig.13-5b)
Holder
Plate (B)
- 45 -
Optical Unit disassemblies
Fig.13-5
Temp. sensor unit
(PTH901)
H
Polarized
glass (IN)
Plate (D)
G
G
Plate (D)
Fig.13-5b
Advertisement
Table of Contents
