Table of Contents
Advertisement
D*AP LM 4
Web GUI – INTERFACE – SDI I/O Interface – Status
Status – Indicates the current status major SDI settings and parameters.
Video Standard
SDI Bypass
Relay Bypass
Test Generator Active
Video Delay Enabled
De-Embedder Audio Status
ARIB B39
Data Available
Block Error
Audio Mode
display of the video standard detected by the SDI input.
turns yellow if the SDI bypass function is activated.
turns yellow if the power fail relay is deactivated manually.
turns yellow if the Generator is turned on.
turns green if the video delay is activated.
is grey if no audio is present
turns green if PCM audio is embedded
turns yellow if a non audio signal is present, an additional label shows
the kind of signal if it is possible to gather the information.
meta information standard.
turns green if ARIB B-39 meta information are detected.
turns red if an error has been detected.
see ARIB Japanese standard "Structure of Inter-Stationary Control
Data Conveyed by Ancillary Data Packets" :
http://www.arib.or.jp/english/html/overview/doc/2-STD-B39v1_2.pdf
21
Advertisement
Table of Contents
