Web Gui - Audio Processor - Filter - Spectral Signature - junger D-AP LM4 Manual

Fail Threshold (dBFS)
Fail Wait (s)
Fail Return (s)
Side Chain Filter
Web GUI – AUDIO PROCESSOR – Filter – Spectral Signature
Two options are available to modify the audio signal(s) :
AUDIO PROCESSOR – Filter – Spectral Signature
Link
Spectral Signature
Note that this feature requires the appropriate license and the additional J*AM Jünger Application Manager
software to be installed separately.
The application manager may be downloaded from the Junger website :
www.junger-audio.com/download/soft-firmware/JungerApplicationManager_a.b.cdefg.zip
For details how to operate the J*AM, pls. also see separate manual :
http://www.junger-audio.com/uploads/media/JAM_manual_yymmdd.pdf
[-80 ... -40]
RMS weighted input level for fail detection.
[1.5 ... 10.0]
elapsed time after fail detection until the switch over will happen.
[0.0 ... 10.0]
elapsed time after detection of a proper input signal until the switch
back to the program input.
[OFF / ON]
a high pass filter (300 Hz) and a low pass filter (3000 Hz) is applied
to the detector side chain (not the audio path) to prevent hum and
noise from blocking fail over switching.
[Linked / Unlinked]
[Enable / Disable]
is a dynamic multi band filter that allows precise control of the audio
spectrum. It is useful in order to create a unique "signature sound" for
audio broadcast.
26
D*AP LM 4