Table of Contents
Advertisement
D*AP LM 4
Web GUI – SYSTEM – System Status
System Status – Provides a current overview of critical system parameters including device, processing and
interface status along with a system log and any system messages.
Device Status
Power 1
Power 2 (optional)
Temperature
Sync Lock
Processing Status
Bypass
Interface Status
AES I/O
SDI I/O Interface
provides the hardware status of the LM 4
status of the first power supply (left hand side from rear)
status of second power supply (right hand side from rear)
measured on the surface of the main PCB
turns red if the external sync source is removed or unstable
turns red if Bypass is activated
turns red if an AES input that is internally in use (i.e you have routed it to
an input of a function block) has detected an error
turns red if the SDI input is not locked (no or bad SDI signal)
15
Advertisement
Table of Contents
