Removing A Hot-Plug Expansion Card - Fujitsu PRIMERGY RX600 S4 Operating Manual

Hot-plug components
1
2
3
4
5
6
7
Figure 30: Slots with and without hot-plug functionality
I
Slots 1 - 4 (green locks) are hot-plug slots.
Slots 5 - 7 (blue locks) are slots without hot-plug functionality. The server
must be switched off before expansion cards are replaced or inserted in
these slots. The procedure is described in the Options Guide / Service
Supplement.
8.1.5.1

Removing a hot-plug expansion card

Ê Open the housing cover (see
Ê If required by the operating system (e.g. Windows 2000), start the PCI hot-
plug software. You will find information about this in the readme file on the
ServerStart Disc 1.
98
"Opening/closing the housing" on page
Operating manual
CSS components
114).
RX600 S4