CSS components
I
Keep the retaining plate for future use.
Ê Push the engaging hooks down until they disengage from the removal tool
(see
figure 33 on page
8.1.5.3
Installing a hot-plug expansion card
Inserting an expansion card in the removal tool
Figure 35: Inserting the new expansion card in the removal tool
Ê Insert the new expansion card in the provided slot (a) of the removal tool (1).
I
This step is not necessary for short and low-profile expansion cards.
RX600 S4
101), and keep them in a safe place.
Operating manual
Hot-plug components
1
a
103